compiling from source code

classic Classic list List threaded Threaded
14 messages Options
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

compiling from source code

Sandeep Gupta
Hi,

I am using gcc version 5.3 to compile postgis on Fedora.
The compile  fails at the configure step.

I get the error:

configure: error: C preprocessor "gcc" fails sanity check
See `config.log' for more details

The relevant line in config.log:
configure:3031: gcc -v >&5
Reading specs from
/home/linuxbrew/.linuxbrew/Cellar/gcc/5.3.0/lib/gcc/x86_64-unknown-linux-gnu/5.3.0/specs
COLLECT_GCC=gcc
COLLECT_LTO_WRAPPER=/home/linuxbrew/.linuxbrew/Cellar/gcc/5.3.0/libexec/gcc/x86_64-unknown-linux-gnu/5.3.0/lto-wrapper
Target: x86_64-unknown-linux-gnu
Configured with: ../configure
--prefix=/home/linuxbrew/.linuxbrew/Cellar/gcc/5.3.0
--enable-languages=c,c++,objc,obj-c++,fortran --program-suffix=-5
--with-gmp=/home/linuxbrew/.linuxbrew/opt/gmp
--with-mpfr=/home/linuxbrew/.linuxbrew/opt/mpfr
--with-mpc=/home/linuxbrew/.linuxbrew/opt/libmpc
--with-isl=/home/linuxbrew/.linuxbrew/opt/isl --with-system-zlib
--enable-libstdcxx-time=yes --enable-stage1-checking
--enable-checking=release --enable-lto
--with-build-config=bootstrap-debug --disable-werror
--with-pkgversion='Homebrew gcc 5.3.0'
--with-bugurl=https://github.com/Homebrew/homebrew/issues
--enable-plugin --disable-nls --disable-multilib
Thread model: posix
gcc version 5.3.0 (Homebrew gcc 5.3.0)
configure:3042: $? = 0
configure:3031: gcc -V >&5
gcc: error: unrecognized command line option '-V'
gcc: fatal error: no input files
compilation terminated.



It seems gcc does not like "-V" option. I this a issue to with later
gcc versions?

Thanks.
sandeep
_______________________________________________
postgis-users mailing list
[hidden email]
https://lists.osgeo.org/mailman/listinfo/postgis-users
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: compiling from source code

Stephen Woodbridge
I get the same error running on Ubuntu 16.04 with:

$ gcc -V
gcc: error: unrecognized command line option ‘-V’
gcc: fatal error: no input files
compilation terminated.

Looks like the option should be --version
$ gcc --version
gcc (Ubuntu 5.4.0-6ubuntu1~16.04.4) 5.4.0 20160609
Copyright (C) 2015 Free Software Foundation, Inc.
This is free software; see the source for copying conditions.  There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

-Steve

On 7/7/2017 1:51 PM, Sandeep Gupta wrote:

> Hi,
>
> I am using gcc version 5.3 to compile postgis on Fedora.
> The compile  fails at the configure step.
>
> I get the error:
>
> configure: error: C preprocessor "gcc" fails sanity check
> See `config.log' for more details
>
> The relevant line in config.log:
> configure:3031: gcc -v >&5
> Reading specs from
> /home/linuxbrew/.linuxbrew/Cellar/gcc/5.3.0/lib/gcc/x86_64-unknown-linux-gnu/5.3.0/specs
> COLLECT_GCC=gcc
> COLLECT_LTO_WRAPPER=/home/linuxbrew/.linuxbrew/Cellar/gcc/5.3.0/libexec/gcc/x86_64-unknown-linux-gnu/5.3.0/lto-wrapper
> Target: x86_64-unknown-linux-gnu
> Configured with: ../configure
> --prefix=/home/linuxbrew/.linuxbrew/Cellar/gcc/5.3.0
> --enable-languages=c,c++,objc,obj-c++,fortran --program-suffix=-5
> --with-gmp=/home/linuxbrew/.linuxbrew/opt/gmp
> --with-mpfr=/home/linuxbrew/.linuxbrew/opt/mpfr
> --with-mpc=/home/linuxbrew/.linuxbrew/opt/libmpc
> --with-isl=/home/linuxbrew/.linuxbrew/opt/isl --with-system-zlib
> --enable-libstdcxx-time=yes --enable-stage1-checking
> --enable-checking=release --enable-lto
> --with-build-config=bootstrap-debug --disable-werror
> --with-pkgversion='Homebrew gcc 5.3.0'
> --with-bugurl=https://github.com/Homebrew/homebrew/issues
> --enable-plugin --disable-nls --disable-multilib
> Thread model: posix
> gcc version 5.3.0 (Homebrew gcc 5.3.0)
> configure:3042: $? = 0
> configure:3031: gcc -V >&5
> gcc: error: unrecognized command line option '-V'
> gcc: fatal error: no input files
> compilation terminated.
>
>
>
> It seems gcc does not like "-V" option. I this a issue to with later
> gcc versions?
>
> Thanks.
> sandeep
> _______________________________________________
> postgis-users mailing list
> [hidden email]
> https://lists.osgeo.org/mailman/listinfo/postgis-users
>


---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus

_______________________________________________
postgis-users mailing list
[hidden email]
https://lists.osgeo.org/mailman/listinfo/postgis-users
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: compiling from source code

Regina Obe-2
Steve and Sandeep,

Can you try gcc -v instead and let me know what that outputs?

I just checked our Debian PostGIS bot, and she's running gcc 5.2.1  and think she's running the newest of any of our bots . So I can 't rule out a newer gcc at fault here.
However if I do gcc -V, I get an error on her too, so that's not the issue here:
--

gcc: error: unrecognized command line option â?~-Vâ?T
gcc: fatal error: no input files
compilation terminated.

However, lower case -v  (which is what I think configure uses, works just fine).

gcc -v

outputs:
Using built-in specs.
COLLECT_GCC=gcc
COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-linux-gnu/5/lto-wrapper
Target: x86_64-linux-gnu
Configured with: ../src/configure -v --with-pkgversion='Debian 5.2.1-22' --with-bugurl=file:///usr/share/doc/gcc-5/README.Bugs --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --prefix=/usr --program-suffix=-5 --enable-shared --ena
jar-dir=/usr/lib/jvm-exports/java-1.5.0-gcj-5-amd64 --with-arch-directory=amd64 --with-ecj-jar=/usr/share/java/eclipse-ecj.jar --enable-objc-gc --enable-multiarch --with-arch-32=i586 --with-abi=m64 --with-multilib-list=m32,m64,mx32 --enable-m
Thread model: posix
gcc version 5.2.1 20151010 (Debian 5.2.1-22)


I'm not sure where Sandeep's   gcc -V is coming from in configure, cause it looks like gcc -v works fine on his system too, but then somewhere down the line switches to upper case -V which is not a valid switch command even in lower gcc versions.




Thanks,
Regina

-----
From: Stephen Woodbridge Date: Fri, Jul 7, 2017 at 2:09 PM



I get the same error running on Ubuntu 16.04 with:

$ gcc -V
gcc: error: unrecognized command line option ‘-V’
gcc: fatal error: no input files
compilation terminated.

Looks like the option should be --version
$ gcc --version
gcc (Ubuntu 5.4.0-6ubuntu1~16.04.4) 5.4.0 20160609
Copyright (C) 2015 Free Software Foundation, Inc.
This is free software; see the source for copying conditions.  There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

-Steve

On 7/7/2017 1:51 PM, Sandeep Gupta wrote:
Hi,

I am using gcc version 5.3 to compile postgis on Fedora.
The compile  fails at the configure step.

I get the error:

configure: error: C preprocessor "gcc" fails sanity check
See `config.log' for more details

The relevant line in config.log:
configure:3031: gcc -v >&5
Reading specs from
/home/linuxbrew/.linuxbrew/Cellar/gcc/5.3.0/lib/gcc/x86_64-unknown-linux-gnu/5.3.0/specs
COLLECT_GCC=gcc
COLLECT_LTO_WRAPPER=/home/linuxbrew/.linuxbrew/Cellar/gcc/5.3.0/libexec/gcc/x86_64-unknown-linux-gnu/5.3.0/lto-wrapper
Target: x86_64-unknown-linux-gnu
Configured with: ../configure
--prefix=/home/linuxbrew/.linuxbrew/Cellar/gcc/5.3.0
--enable-languages=c,c++,objc,obj-c++,fortran --program-suffix=-5
--with-gmp=/home/linuxbrew/.linuxbrew/opt/gmp
--with-mpfr=/home/linuxbrew/.linuxbrew/opt/mpfr
--with-mpc=/home/linuxbrew/.linuxbrew/opt/libmpc
--with-isl=/home/linuxbrew/.linuxbrew/opt/isl --with-system-zlib
--enable-libstdcxx-time=yes --enable-stage1-checking
--enable-checking=release --enable-lto
--with-build-config=bootstrap-debug --disable-werror
--with-pkgversion='Homebrew gcc 5.3.0'
--with-bugurl=https://github.com/Homebrew/homebrew/issues
--enable-plugin --disable-nls --disable-multilib
Thread model: posix
gcc version 5.3.0 (Homebrew gcc 5.3.0)
configure:3042: $? = 0
configure:3031: gcc -V >&5
gcc: error: unrecognized command line option '-V'
gcc: fatal error: no input files
compilation terminated.



It seems gcc does not like "-V" option. I this a issue to with later
gcc versions?

Thanks.
sandeep
_______________________________________________
postgis-users mailing list
[hidden email]
https://lists.osgeo.org/mailman/listinfo/postgis-users


---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus

_______________________________________________
postgis-users mailing list
[hidden email]
https://lists.osgeo.org/mailman/listinfo/postgis-users


_______________________________________________
postgis-users mailing list
[hidden email]
https://lists.osgeo.org/mailman/listinfo/postgis-users
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: compiling from source code

Sandeep Gupta
Hi Regina,

 Here is the output for gcc -v (install gcc from linuxbrew, which port
of brew package manager of macOS):

Reading specs from
/home/linuxbrew/.linuxbrew/Cellar/gcc/5.3.0/lib/gcc/x86_64-unknown-linux-gnu/5.3.0/specs
COLLECT_GCC=gcc
COLLECT_LTO_WRAPPER=/home/linuxbrew/.linuxbrew/Cellar/gcc/5.3.0/libexec/gcc/x86_64-unknown-linux-gnu/5.3.0/lto-wrapper
Target: x86_64-unknown-linux-gnu
Configured with: ../configure
--prefix=/home/linuxbrew/.linuxbrew/Cellar/gcc/5.3.0
--enable-languages=c,c++,objc,obj-c++,fortran --program-suffix=-5
--with-gmp=/home/linuxbrew/.linuxbrew/opt/gmp
--with-mpfr=/home/linuxbrew/.linuxbrew/opt/mpfr
--with-mpc=/home/linuxbrew/.linuxbrew/opt/libmpc
--with-isl=/home/linuxbrew/.linuxbrew/opt/isl --with-system-zlib
--enable-libstdcxx-time=yes --enable-stage1-checking
--enable-checking=release --enable-lto
--with-build-config=bootstrap-debug --disable-werror
--with-pkgversion='Homebrew gcc 5.3.0'
--with-bugurl=https://github.com/Homebrew/homebrew/issues
--enable-plugin --disable-nls --disable-multilib
Thread model: posix
gcc version 5.3.0 (Homebrew gcc 5.3.0)


Thanks.
sandeep



On Fri, Jul 7, 2017 at 5:52 PM, Regina Obe <[hidden email]> wrote:

> Steve and Sandeep,
>
> Can you try gcc -v instead and let me know what that outputs?
>
> I just checked our Debian PostGIS bot, and she's running gcc 5.2.1  and think she's running the newest of any of our bots . So I can 't rule out a newer gcc at fault here.
> However if I do gcc -V, I get an error on her too, so that's not the issue here:
> --
>
> gcc: error: unrecognized command line option â?~-Vâ?T
> gcc: fatal error: no input files
> compilation terminated.
>
> However, lower case -v  (which is what I think configure uses, works just fine).
>
> gcc -v
>
> outputs:
> Using built-in specs.
> COLLECT_GCC=gcc
> COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-linux-gnu/5/lto-wrapper
> Target: x86_64-linux-gnu
> Configured with: ../src/configure -v --with-pkgversion='Debian 5.2.1-22' --with-bugurl=file:///usr/share/doc/gcc-5/README.Bugs --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --prefix=/usr --program-suffix=-5 --enable-shared --ena
> jar-dir=/usr/lib/jvm-exports/java-1.5.0-gcj-5-amd64 --with-arch-directory=amd64 --with-ecj-jar=/usr/share/java/eclipse-ecj.jar --enable-objc-gc --enable-multiarch --with-arch-32=i586 --with-abi=m64 --with-multilib-list=m32,m64,mx32 --enable-m
> Thread model: posix
> gcc version 5.2.1 20151010 (Debian 5.2.1-22)
>
>
> I'm not sure where Sandeep's   gcc -V is coming from in configure, cause it looks like gcc -v works fine on his system too, but then somewhere down the line switches to upper case -V which is not a valid switch command even in lower gcc versions.
>
>
>
>
> Thanks,
> Regina
>
> -----
> From: Stephen Woodbridge Date: Fri, Jul 7, 2017 at 2:09 PM
>
>
>
> I get the same error running on Ubuntu 16.04 with:
>
> $ gcc -V
> gcc: error: unrecognized command line option ‘-V’
> gcc: fatal error: no input files
> compilation terminated.
>
> Looks like the option should be --version
> $ gcc --version
> gcc (Ubuntu 5.4.0-6ubuntu1~16.04.4) 5.4.0 20160609
> Copyright (C) 2015 Free Software Foundation, Inc.
> This is free software; see the source for copying conditions.  There is NO
> warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
>
> -Steve
>
> On 7/7/2017 1:51 PM, Sandeep Gupta wrote:
> Hi,
>
> I am using gcc version 5.3 to compile postgis on Fedora.
> The compile  fails at the configure step.
>
> I get the error:
>
> configure: error: C preprocessor "gcc" fails sanity check
> See `config.log' for more details
>
> The relevant line in config.log:
> configure:3031: gcc -v >&5
> Reading specs from
> /home/linuxbrew/.linuxbrew/Cellar/gcc/5.3.0/lib/gcc/x86_64-unknown-linux-gnu/5.3.0/specs
> COLLECT_GCC=gcc
> COLLECT_LTO_WRAPPER=/home/linuxbrew/.linuxbrew/Cellar/gcc/5.3.0/libexec/gcc/x86_64-unknown-linux-gnu/5.3.0/lto-wrapper
> Target: x86_64-unknown-linux-gnu
> Configured with: ../configure
> --prefix=/home/linuxbrew/.linuxbrew/Cellar/gcc/5.3.0
> --enable-languages=c,c++,objc,obj-c++,fortran --program-suffix=-5
> --with-gmp=/home/linuxbrew/.linuxbrew/opt/gmp
> --with-mpfr=/home/linuxbrew/.linuxbrew/opt/mpfr
> --with-mpc=/home/linuxbrew/.linuxbrew/opt/libmpc
> --with-isl=/home/linuxbrew/.linuxbrew/opt/isl --with-system-zlib
> --enable-libstdcxx-time=yes --enable-stage1-checking
> --enable-checking=release --enable-lto
> --with-build-config=bootstrap-debug --disable-werror
> --with-pkgversion='Homebrew gcc 5.3.0'
> --with-bugurl=https://github.com/Homebrew/homebrew/issues
> --enable-plugin --disable-nls --disable-multilib
> Thread model: posix
> gcc version 5.3.0 (Homebrew gcc 5.3.0)
> configure:3042: $? = 0
> configure:3031: gcc -V >&5
> gcc: error: unrecognized command line option '-V'
> gcc: fatal error: no input files
> compilation terminated.
>
>
>
> It seems gcc does not like "-V" option. I this a issue to with later
> gcc versions?
>
> Thanks.
> sandeep
> _______________________________________________
> postgis-users mailing list
> [hidden email]
> https://lists.osgeo.org/mailman/listinfo/postgis-users
>
>
> ---
> This email has been checked for viruses by Avast antivirus software.
> https://www.avast.com/antivirus
>
> _______________________________________________
> postgis-users mailing list
> [hidden email]
> https://lists.osgeo.org/mailman/listinfo/postgis-users
>
>
> _______________________________________________
> postgis-users mailing list
> [hidden email]
> https://lists.osgeo.org/mailman/listinfo/postgis-users
_______________________________________________
postgis-users mailing list
[hidden email]
https://lists.osgeo.org/mailman/listinfo/postgis-users
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: compiling from source code

Stephen Woodbridge
In reply to this post by Regina Obe-2

$ gcc-4.7 -v
Using built-in specs.
COLLECT_GCC=gcc-4.7
COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-linux-gnu/4.7/lto-wrapper
Target: x86_64-linux-gnu
Configured with: ../src/configure -v --with-pkgversion='Ubuntu/Linaro
4.7.4-3ubuntu12' --with-bugurl=file:///usr/share/doc/gcc-4.7/README.Bugs
--enable-languages=c,c++,go,fortran,objc,obj-c++ --prefix=/usr
--program-suffix=-4.7 --enable-shared --enable-linker-build-id
--libexecdir=/usr/lib --without-included-gettext --enable-threads=posix
--with-gxx-include-dir=/usr/include/c++/4.7 --libdir=/usr/lib
--enable-nls --with-sysroot=/ --enable-clocale=gnu
--enable-libstdcxx-debug --enable-gnu-unique-object --disable-libmudflap
--enable-plugin --with-system-zlib --enable-objc-gc --with-cloog
--enable-cloog-backend=ppl --disable-cloog-version-check
--disable-ppl-version-check --enable-multiarch --disable-werror
--with-arch-32=i686 --with-abi=m64 --with-multilib-list=m32,m64,mx32
--with-tune=generic --enable-checking=release --build=x86_64-linux-gnu
--host=x86_64-linux-gnu --target=x86_64-linux-gnu
Thread model: posix
gcc version 4.7.4 (Ubuntu/Linaro 4.7.4-3ubuntu12)

$ gcc-4.8 -v
Using built-in specs.
COLLECT_GCC=gcc-4.8
COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-linux-gnu/4.8/lto-wrapper
Target: x86_64-linux-gnu
Configured with: ../src/configure -v --with-pkgversion='Ubuntu
4.8.5-4ubuntu2' --with-bugurl=file:///usr/share/doc/gcc-4.8/README.Bugs
--enable-languages=c,c++,java,go,d,fortran,objc,obj-c++ --prefix=/usr
--program-suffix=-4.8 --enable-shared --enable-linker-build-id
--libexecdir=/usr/lib --without-included-gettext --enable-threads=posix
--with-gxx-include-dir=/usr/include/c++/4.8 --libdir=/usr/lib
--enable-nls --with-sysroot=/ --enable-clocale=gnu
--enable-libstdcxx-debug --enable-libstdcxx-time=yes
--enable-gnu-unique-object --disable-libmudflap --enable-plugin
--with-system-zlib --disable-browser-plugin --enable-java-awt=gtk
--enable-gtk-cairo
--with-java-home=/usr/lib/jvm/java-1.5.0-gcj-4.8-amd64/jre
--enable-java-home
--with-jvm-root-dir=/usr/lib/jvm/java-1.5.0-gcj-4.8-amd64
--with-jvm-jar-dir=/usr/lib/jvm-exports/java-1.5.0-gcj-4.8-amd64
--with-arch-directory=amd64
--with-ecj-jar=/usr/share/java/eclipse-ecj.jar --enable-objc-gc
--enable-multiarch --disable-werror --with-arch-32=i686 --with-abi=m64
--with-multilib-list=m32,m64,mx32 --with-tune=generic
--enable-checking=release --build=x86_64-linux-gnu
--host=x86_64-linux-gnu --target=x86_64-linux-gnu
Thread model: posix
gcc version 4.8.5 (Ubuntu 4.8.5-4ubuntu2)

$ gcc -v
Using built-in specs.
COLLECT_GCC=gcc
COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-linux-gnu/5/lto-wrapper
Target: x86_64-linux-gnu
Configured with: ../src/configure -v --with-pkgversion='Ubuntu
5.4.0-6ubuntu1~16.04.4'
--with-bugurl=file:///usr/share/doc/gcc-5/README.Bugs
--enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++
--prefix=/usr --program-suffix=-5 --enable-shared
--enable-linker-build-id --libexecdir=/usr/lib
--without-included-gettext --enable-threads=posix --libdir=/usr/lib
--enable-nls --with-sysroot=/ --enable-clocale=gnu
--enable-libstdcxx-debug --enable-libstdcxx-time=yes
--with-default-libstdcxx-abi=new --enable-gnu-unique-object
--disable-vtable-verify --enable-libmpx --enable-plugin
--with-system-zlib --disable-browser-plugin --enable-java-awt=gtk
--enable-gtk-cairo
--with-java-home=/usr/lib/jvm/java-1.5.0-gcj-5-amd64/jre
--enable-java-home
--with-jvm-root-dir=/usr/lib/jvm/java-1.5.0-gcj-5-amd64
--with-jvm-jar-dir=/usr/lib/jvm-exports/java-1.5.0-gcj-5-amd64
--with-arch-directory=amd64
--with-ecj-jar=/usr/share/java/eclipse-ecj.jar --enable-objc-gc
--enable-multiarch --disable-werror --with-arch-32=i686 --with-abi=m64
--with-multilib-list=m32,m64,mx32 --enable-multilib --with-tune=generic
--enable-checking=release --build=x86_64-linux-gnu
--host=x86_64-linux-gnu --target=x86_64-linux-gnu
Thread model: posix
gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.4)




On 7/7/2017 5:52 PM, Regina Obe wrote:

> Steve and Sandeep,
>
> Can you try gcc -v instead and let me know what that outputs?
>
> I just checked our Debian PostGIS bot, and she's running gcc 5.2.1  and think she's running the newest of any of our bots . So I can 't rule out a newer gcc at fault here.
> However if I do gcc -V, I get an error on her too, so that's not the issue here:
> --
>
> gcc: error: unrecognized command line option â?~-Vâ?T
> gcc: fatal error: no input files
> compilation terminated.
>
> However, lower case -v  (which is what I think configure uses, works just fine).
>
> gcc -v
>
> outputs:
> Using built-in specs.
> COLLECT_GCC=gcc
> COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-linux-gnu/5/lto-wrapper
> Target: x86_64-linux-gnu
> Configured with: ../src/configure -v --with-pkgversion='Debian 5.2.1-22' --with-bugurl=file:///usr/share/doc/gcc-5/README.Bugs --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++ --prefix=/usr --program-suffix=-5 --enable-shared --ena
> jar-dir=/usr/lib/jvm-exports/java-1.5.0-gcj-5-amd64 --with-arch-directory=amd64 --with-ecj-jar=/usr/share/java/eclipse-ecj.jar --enable-objc-gc --enable-multiarch --with-arch-32=i586 --with-abi=m64 --with-multilib-list=m32,m64,mx32 --enable-m
> Thread model: posix
> gcc version 5.2.1 20151010 (Debian 5.2.1-22)
>
>
> I'm not sure where Sandeep's   gcc -V is coming from in configure, cause it looks like gcc -v works fine on his system too, but then somewhere down the line switches to upper case -V which is not a valid switch command even in lower gcc versions.
>
>
>
>
> Thanks,
> Regina
>
> -----
> From: Stephen Woodbridge Date: Fri, Jul 7, 2017 at 2:09 PM
>
>
>
> I get the same error running on Ubuntu 16.04 with:
>
> $ gcc -V
> gcc: error: unrecognized command line option ‘-V’
> gcc: fatal error: no input files
> compilation terminated.
>
> Looks like the option should be --version
> $ gcc --version
> gcc (Ubuntu 5.4.0-6ubuntu1~16.04.4) 5.4.0 20160609
> Copyright (C) 2015 Free Software Foundation, Inc.
> This is free software; see the source for copying conditions.  There is NO
> warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
>
> -Steve
>
> On 7/7/2017 1:51 PM, Sandeep Gupta wrote:
> Hi,
>
> I am using gcc version 5.3 to compile postgis on Fedora.
> The compile  fails at the configure step.
>
> I get the error:
>
> configure: error: C preprocessor "gcc" fails sanity check
> See `config.log' for more details
>
> The relevant line in config.log:
> configure:3031: gcc -v >&5
> Reading specs from
> /home/linuxbrew/.linuxbrew/Cellar/gcc/5.3.0/lib/gcc/x86_64-unknown-linux-gnu/5.3.0/specs
> COLLECT_GCC=gcc
> COLLECT_LTO_WRAPPER=/home/linuxbrew/.linuxbrew/Cellar/gcc/5.3.0/libexec/gcc/x86_64-unknown-linux-gnu/5.3.0/lto-wrapper
> Target: x86_64-unknown-linux-gnu
> Configured with: ../configure
> --prefix=/home/linuxbrew/.linuxbrew/Cellar/gcc/5.3.0
> --enable-languages=c,c++,objc,obj-c++,fortran --program-suffix=-5
> --with-gmp=/home/linuxbrew/.linuxbrew/opt/gmp
> --with-mpfr=/home/linuxbrew/.linuxbrew/opt/mpfr
> --with-mpc=/home/linuxbrew/.linuxbrew/opt/libmpc
> --with-isl=/home/linuxbrew/.linuxbrew/opt/isl --with-system-zlib
> --enable-libstdcxx-time=yes --enable-stage1-checking
> --enable-checking=release --enable-lto
> --with-build-config=bootstrap-debug --disable-werror
> --with-pkgversion='Homebrew gcc 5.3.0'
> --with-bugurl=https://github.com/Homebrew/homebrew/issues
> --enable-plugin --disable-nls --disable-multilib
> Thread model: posix
> gcc version 5.3.0 (Homebrew gcc 5.3.0)
> configure:3042: $? = 0
> configure:3031: gcc -V >&5
> gcc: error: unrecognized command line option '-V'
> gcc: fatal error: no input files
> compilation terminated.
>
>
>
> It seems gcc does not like "-V" option. I this a issue to with later
> gcc versions?
>
> Thanks.
> sandeep
> _______________________________________________
> postgis-users mailing list
> [hidden email]
> https://lists.osgeo.org/mailman/listinfo/postgis-users
>
>
> ---
> This email has been checked for viruses by Avast antivirus software.
> https://www.avast.com/antivirus
>
> _______________________________________________
> postgis-users mailing list
> [hidden email]
> https://lists.osgeo.org/mailman/listinfo/postgis-users
>
>
> _______________________________________________
> postgis-users mailing list
> [hidden email]
> https://lists.osgeo.org/mailman/listinfo/postgis-users
>

_______________________________________________
postgis-users mailing list
[hidden email]
https://lists.osgeo.org/mailman/listinfo/postgis-users
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: compiling from source code

Regina Obe-2
In reply to this post by Sandeep Gupta
Okay I just got an irc note from Even Roualt.  He is running Ubuntu 16.04 and gcc 5.4  and had no issue running

sh autogen.sh
./configure

So doesn't seem like it's a newer gcc issue unless if its 5.3 specific.  

I'm suspecting something with brew,  MacOS, or tool chain like autoconf.

What does:

autoconf --version

Return?

I get

autoconf (GNU Autoconf) 2.69
Copyright (C) 2012 Free Software Foundation, Inc.
License GPLv3+/Autoconf: GNU GPL version 3 or later

Thanks,
Regina

-----Original Message-----
From: postgis-users [mailto:[hidden email]] On Behalf Of Sandeep Gupta
Sent: Friday, July 07, 2017 6:18 PM
To: PostGIS Users Discussion <[hidden email]>
Subject: Re: [postgis-users] compiling from source code

Hi Regina,

 Here is the output for gcc -v (install gcc from linuxbrew, which port of brew package manager of macOS):

Reading specs from
/home/linuxbrew/.linuxbrew/Cellar/gcc/5.3.0/lib/gcc/x86_64-unknown-linux-gnu/5.3.0/specs
COLLECT_GCC=gcc
COLLECT_LTO_WRAPPER=/home/linuxbrew/.linuxbrew/Cellar/gcc/5.3.0/libexec/gcc/x86_64-unknown-linux-gnu/5.3.0/lto-wrapper
Target: x86_64-unknown-linux-gnu
Configured with: ../configure
--prefix=/home/linuxbrew/.linuxbrew/Cellar/gcc/5.3.0
--enable-languages=c,c++,objc,obj-c++,fortran --program-suffix=-5 --with-gmp=/home/linuxbrew/.linuxbrew/opt/gmp
--with-mpfr=/home/linuxbrew/.linuxbrew/opt/mpfr
--with-mpc=/home/linuxbrew/.linuxbrew/opt/libmpc
--with-isl=/home/linuxbrew/.linuxbrew/opt/isl --with-system-zlib --enable-libstdcxx-time=yes --enable-stage1-checking --enable-checking=release --enable-lto --with-build-config=bootstrap-debug --disable-werror --with-pkgversion='Homebrew gcc 5.3.0'
--with-bugurl=https://github.com/Homebrew/homebrew/issues
--enable-plugin --disable-nls --disable-multilib Thread model: posix gcc version 5.3.0 (Homebrew gcc 5.3.0)


Thanks.
sandeep



On Fri, Jul 7, 2017 at 5:52 PM, Regina Obe <[hidden email]> wrote:

> Steve and Sandeep,
>
> Can you try gcc -v instead and let me know what that outputs?
>
> I just checked our Debian PostGIS bot, and she's running gcc 5.2.1  and think she's running the newest of any of our bots . So I can 't rule out a newer gcc at fault here.
> However if I do gcc -V, I get an error on her too, so that's not the issue here:
> --
>
> gcc: error: unrecognized command line option  ?~-V ?T
> gcc: fatal error: no input files
> compilation terminated.
>
> However, lower case -v  (which is what I think configure uses, works just fine).
>
> gcc -v
>
> outputs:
> Using built-in specs.
> COLLECT_GCC=gcc
> COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-linux-gnu/5/lto-wrapper
> Target: x86_64-linux-gnu
> Configured with: ../src/configure -v --with-pkgversion='Debian
> 5.2.1-22' --with-bugurl=file:///usr/share/doc/gcc-5/README.Bugs
> --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++
> --prefix=/usr --program-suffix=-5 --enable-shared --ena
> jar-dir=/usr/lib/jvm-exports/java-1.5.0-gcj-5-amd64
> --with-arch-directory=amd64
> --with-ecj-jar=/usr/share/java/eclipse-ecj.jar --enable-objc-gc
> --enable-multiarch --with-arch-32=i586 --with-abi=m64
> --with-multilib-list=m32,m64,mx32 --enable-m Thread model: posix gcc
> version 5.2.1 20151010 (Debian 5.2.1-22)
>
>
> I'm not sure where Sandeep's   gcc -V is coming from in configure, cause it looks like gcc -v works fine on his system too, but then somewhere down the line switches to upper case -V which is not a valid switch command even in lower gcc versions.
>
>
>
>
> Thanks,
> Regina
>
> -----
> From: Stephen Woodbridge Date: Fri, Jul 7, 2017 at 2:09 PM
>
>
>
> I get the same error running on Ubuntu 16.04 with:
>
> $ gcc -V
> gcc: error: unrecognized command line option  -V
> gcc: fatal error: no input files
> compilation terminated.
>
> Looks like the option should be --version $ gcc --version gcc (Ubuntu
> 5.4.0-6ubuntu1~16.04.4) 5.4.0 20160609 Copyright (C) 2015 Free
> Software Foundation, Inc.
> This is free software; see the source for copying conditions.  There
> is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
>
> -Steve
>
> On 7/7/2017 1:51 PM, Sandeep Gupta wrote:
> Hi,
>
> I am using gcc version 5.3 to compile postgis on Fedora.
> The compile  fails at the configure step.
>
> I get the error:
>
> configure: error: C preprocessor "gcc" fails sanity check See
> `config.log' for more details
>
> The relevant line in config.log:
> configure:3031: gcc -v >&5
> Reading specs from
> /home/linuxbrew/.linuxbrew/Cellar/gcc/5.3.0/lib/gcc/x86_64-unknown-lin
> ux-gnu/5.3.0/specs
> COLLECT_GCC=gcc
> COLLECT_LTO_WRAPPER=/home/linuxbrew/.linuxbrew/Cellar/gcc/5.3.0/libexe
> c/gcc/x86_64-unknown-linux-gnu/5.3.0/lto-wrapper
> Target: x86_64-unknown-linux-gnu
> Configured with: ../configure
> --prefix=/home/linuxbrew/.linuxbrew/Cellar/gcc/5.3.0
> --enable-languages=c,c++,objc,obj-c++,fortran --program-suffix=-5
> --with-gmp=/home/linuxbrew/.linuxbrew/opt/gmp
> --with-mpfr=/home/linuxbrew/.linuxbrew/opt/mpfr
> --with-mpc=/home/linuxbrew/.linuxbrew/opt/libmpc
> --with-isl=/home/linuxbrew/.linuxbrew/opt/isl --with-system-zlib
> --enable-libstdcxx-time=yes --enable-stage1-checking
> --enable-checking=release --enable-lto
> --with-build-config=bootstrap-debug --disable-werror
> --with-pkgversion='Homebrew gcc 5.3.0'
> --with-bugurl=https://github.com/Homebrew/homebrew/issues
> --enable-plugin --disable-nls --disable-multilib Thread model: posix
> gcc version 5.3.0 (Homebrew gcc 5.3.0)
> configure:3042: $? = 0
> configure:3031: gcc -V >&5
> gcc: error: unrecognized command line option '-V'
> gcc: fatal error: no input files
> compilation terminated.
>
>
>
> It seems gcc does not like "-V" option. I this a issue to with later
> gcc versions?
>
> Thanks.
> sandeep
> _______________________________________________
> postgis-users mailing list
> [hidden email]
> https://lists.osgeo.org/mailman/listinfo/postgis-users
>
>
> ---
> This email has been checked for viruses by Avast antivirus software.
> https://www.avast.com/antivirus
>
> _______________________________________________
> postgis-users mailing list
> [hidden email]
> https://lists.osgeo.org/mailman/listinfo/postgis-users
>
>
> _______________________________________________
> postgis-users mailing list
> [hidden email]
> https://lists.osgeo.org/mailman/listinfo/postgis-users
_______________________________________________
postgis-users mailing list
[hidden email]
https://lists.osgeo.org/mailman/listinfo/postgis-users

_______________________________________________
postgis-users mailing list
[hidden email]
https://lists.osgeo.org/mailman/listinfo/postgis-users
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: compiling from source code

Sandeep Gupta
Autoconf was missing, so I went ahead install autoconf, automake, and libtool.

Tried recompiling.

sh autogen.sh outputs:
* Running /home/linuxbrew/.linuxbrew/bin/glibtoolize (2.4.6)
   OPTIONS = --force --copy --install
glibtoolize: putting auxiliary files in '.'.
glibtoolize: copying file './config.guess'
glibtoolize: copying file './config.sub'
glibtoolize: copying file './install-sh'
glibtoolize: copying file './ltmain.sh'
glibtoolize: putting macros in AC_CONFIG_MACRO_DIRS, 'macros'.
glibtoolize: copying file 'macros/libtool.m4'
glibtoolize: copying file 'macros/ltoptions.m4'
glibtoolize: copying file 'macros/ltsugar.m4'
glibtoolize: copying file 'macros/ltversion.m4'
glibtoolize: copying file 'macros/lt~obsolete.m4'
glibtoolize: Consider adding '-I macros' to ACLOCAL_AMFLAGS in Makefile.am.
* Running /home/linuxbrew/.linuxbrew/bin/aclocal (1.15.1)
* Running /home/linuxbrew/.linuxbrew/bin/autoconf (2.69)
======================================
Now you are ready to run './configure'
======================================

This does not solve though. When I run ./configure same error appears
with -V flag being the issue.

-sandeep







On Fri, Jul 7, 2017 at 6:33 PM, Regina Obe <[hidden email]> wrote:

> Okay I just got an irc note from Even Roualt.  He is running Ubuntu 16.04 and gcc 5.4  and had no issue running
>
> sh autogen.sh
> ./configure
>
> So doesn't seem like it's a newer gcc issue unless if its 5.3 specific.
>
> I'm suspecting something with brew,  MacOS, or tool chain like autoconf.
>
> What does:
>
> autoconf --version
>
> Return?
>
> I get
>
> autoconf (GNU Autoconf) 2.69
> Copyright (C) 2012 Free Software Foundation, Inc.
> License GPLv3+/Autoconf: GNU GPL version 3 or later
>
> Thanks,
> Regina
>
> -----Original Message-----
> From: postgis-users [mailto:[hidden email]] On Behalf Of Sandeep Gupta
> Sent: Friday, July 07, 2017 6:18 PM
> To: PostGIS Users Discussion <[hidden email]>
> Subject: Re: [postgis-users] compiling from source code
>
> Hi Regina,
>
>  Here is the output for gcc -v (install gcc from linuxbrew, which port of brew package manager of macOS):
>
> Reading specs from
> /home/linuxbrew/.linuxbrew/Cellar/gcc/5.3.0/lib/gcc/x86_64-unknown-linux-gnu/5.3.0/specs
> COLLECT_GCC=gcc
> COLLECT_LTO_WRAPPER=/home/linuxbrew/.linuxbrew/Cellar/gcc/5.3.0/libexec/gcc/x86_64-unknown-linux-gnu/5.3.0/lto-wrapper
> Target: x86_64-unknown-linux-gnu
> Configured with: ../configure
> --prefix=/home/linuxbrew/.linuxbrew/Cellar/gcc/5.3.0
> --enable-languages=c,c++,objc,obj-c++,fortran --program-suffix=-5 --with-gmp=/home/linuxbrew/.linuxbrew/opt/gmp
> --with-mpfr=/home/linuxbrew/.linuxbrew/opt/mpfr
> --with-mpc=/home/linuxbrew/.linuxbrew/opt/libmpc
> --with-isl=/home/linuxbrew/.linuxbrew/opt/isl --with-system-zlib --enable-libstdcxx-time=yes --enable-stage1-checking --enable-checking=release --enable-lto --with-build-config=bootstrap-debug --disable-werror --with-pkgversion='Homebrew gcc 5.3.0'
> --with-bugurl=https://github.com/Homebrew/homebrew/issues
> --enable-plugin --disable-nls --disable-multilib Thread model: posix gcc version 5.3.0 (Homebrew gcc 5.3.0)
>
>
> Thanks.
> sandeep
>
>
>
> On Fri, Jul 7, 2017 at 5:52 PM, Regina Obe <[hidden email]> wrote:
>> Steve and Sandeep,
>>
>> Can you try gcc -v instead and let me know what that outputs?
>>
>> I just checked our Debian PostGIS bot, and she's running gcc 5.2.1  and think she's running the newest of any of our bots . So I can 't rule out a newer gcc at fault here.
>> However if I do gcc -V, I get an error on her too, so that's not the issue here:
>> --
>>
>> gcc: error: unrecognized command line option  ?~-V ?T
>> gcc: fatal error: no input files
>> compilation terminated.
>>
>> However, lower case -v  (which is what I think configure uses, works just fine).
>>
>> gcc -v
>>
>> outputs:
>> Using built-in specs.
>> COLLECT_GCC=gcc
>> COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-linux-gnu/5/lto-wrapper
>> Target: x86_64-linux-gnu
>> Configured with: ../src/configure -v --with-pkgversion='Debian
>> 5.2.1-22' --with-bugurl=file:///usr/share/doc/gcc-5/README.Bugs
>> --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++
>> --prefix=/usr --program-suffix=-5 --enable-shared --ena
>> jar-dir=/usr/lib/jvm-exports/java-1.5.0-gcj-5-amd64
>> --with-arch-directory=amd64
>> --with-ecj-jar=/usr/share/java/eclipse-ecj.jar --enable-objc-gc
>> --enable-multiarch --with-arch-32=i586 --with-abi=m64
>> --with-multilib-list=m32,m64,mx32 --enable-m Thread model: posix gcc
>> version 5.2.1 20151010 (Debian 5.2.1-22)
>>
>>
>> I'm not sure where Sandeep's   gcc -V is coming from in configure, cause it looks like gcc -v works fine on his system too, but then somewhere down the line switches to upper case -V which is not a valid switch command even in lower gcc versions.
>>
>>
>>
>>
>> Thanks,
>> Regina
>>
>> -----
>> From: Stephen Woodbridge Date: Fri, Jul 7, 2017 at 2:09 PM
>>
>>
>>
>> I get the same error running on Ubuntu 16.04 with:
>>
>> $ gcc -V
>> gcc: error: unrecognized command line option  -V
>> gcc: fatal error: no input files
>> compilation terminated.
>>
>> Looks like the option should be --version $ gcc --version gcc (Ubuntu
>> 5.4.0-6ubuntu1~16.04.4) 5.4.0 20160609 Copyright (C) 2015 Free
>> Software Foundation, Inc.
>> This is free software; see the source for copying conditions.  There
>> is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
>>
>> -Steve
>>
>> On 7/7/2017 1:51 PM, Sandeep Gupta wrote:
>> Hi,
>>
>> I am using gcc version 5.3 to compile postgis on Fedora.
>> The compile  fails at the configure step.
>>
>> I get the error:
>>
>> configure: error: C preprocessor "gcc" fails sanity check See
>> `config.log' for more details
>>
>> The relevant line in config.log:
>> configure:3031: gcc -v >&5
>> Reading specs from
>> /home/linuxbrew/.linuxbrew/Cellar/gcc/5.3.0/lib/gcc/x86_64-unknown-lin
>> ux-gnu/5.3.0/specs
>> COLLECT_GCC=gcc
>> COLLECT_LTO_WRAPPER=/home/linuxbrew/.linuxbrew/Cellar/gcc/5.3.0/libexe
>> c/gcc/x86_64-unknown-linux-gnu/5.3.0/lto-wrapper
>> Target: x86_64-unknown-linux-gnu
>> Configured with: ../configure
>> --prefix=/home/linuxbrew/.linuxbrew/Cellar/gcc/5.3.0
>> --enable-languages=c,c++,objc,obj-c++,fortran --program-suffix=-5
>> --with-gmp=/home/linuxbrew/.linuxbrew/opt/gmp
>> --with-mpfr=/home/linuxbrew/.linuxbrew/opt/mpfr
>> --with-mpc=/home/linuxbrew/.linuxbrew/opt/libmpc
>> --with-isl=/home/linuxbrew/.linuxbrew/opt/isl --with-system-zlib
>> --enable-libstdcxx-time=yes --enable-stage1-checking
>> --enable-checking=release --enable-lto
>> --with-build-config=bootstrap-debug --disable-werror
>> --with-pkgversion='Homebrew gcc 5.3.0'
>> --with-bugurl=https://github.com/Homebrew/homebrew/issues
>> --enable-plugin --disable-nls --disable-multilib Thread model: posix
>> gcc version 5.3.0 (Homebrew gcc 5.3.0)
>> configure:3042: $? = 0
>> configure:3031: gcc -V >&5
>> gcc: error: unrecognized command line option '-V'
>> gcc: fatal error: no input files
>> compilation terminated.
>>
>>
>>
>> It seems gcc does not like "-V" option. I this a issue to with later
>> gcc versions?
>>
>> Thanks.
>> sandeep
>> _______________________________________________
>> postgis-users mailing list
>> [hidden email]
>> https://lists.osgeo.org/mailman/listinfo/postgis-users
>>
>>
>> ---
>> This email has been checked for viruses by Avast antivirus software.
>> https://www.avast.com/antivirus
>>
>> _______________________________________________
>> postgis-users mailing list
>> [hidden email]
>> https://lists.osgeo.org/mailman/listinfo/postgis-users
>>
>>
>> _______________________________________________
>> postgis-users mailing list
>> [hidden email]
>> https://lists.osgeo.org/mailman/listinfo/postgis-users
> _______________________________________________
> postgis-users mailing list
> [hidden email]
> https://lists.osgeo.org/mailman/listinfo/postgis-users
>
> _______________________________________________
> postgis-users mailing list
> [hidden email]
> https://lists.osgeo.org/mailman/listinfo/postgis-users
_______________________________________________
postgis-users mailing list
[hidden email]
https://lists.osgeo.org/mailman/listinfo/postgis-users
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: compiling from source code

Regina Obe-2
Sandeep,

Which version of PostGIS are you trying to build?  Your configure might be ending for another reason.  For example in PostGIS 2.4, I think we now have a dependency on pkg-config which older versions of PostGIS do not.  We'll sort this out before PostGIS release, but I think downside at moment, is the it fails if pkg-config is not installed.  I forget the exact error you get.

I looked around on net for the -V and from what I can tell, that error is harmless and is just part of the process of configure checking the capabilities of the gcc compile.  
I checked my own config.log and see the same error

configure:2948: x86_64-w64-mingw32-gcc -V >&5
x86_64-w64-mingw32-gcc.exe: error: unrecognized command line option '-V'
x86_64-w64-mingw32-gcc.exe: fatal error: no input files
compilation terminated.

But my configure continues, works fine and in the end shows this:

configure:20134: result:
configure:20136: result:   PostGIS is now configured for x86_64-w64-mingw32
configure:20138: result:
configure:20140: result:  -------------- Compiler Info -------------
configure:20142: result:   C compiler:           x86_64-w64-mingw32-gcc -g -O2
configure:20144: result:   SQL preprocessor:     /mingw64/bin/cpp -traditional-cpp -w -P
configure:20146: result:
configure:20148: result:  -------------- Dependencies --------------
configure:20150: result:   GEOS config:          /projects/geos/rel-3.7.0devw64gcc48/bin/geos-config
configure:20152: result:   GEOS version:         3.7.0dev
configure:20155: result:   GDAL config:          /projects/gdal/rel-2.2.1w64gcc48/bin/gdal-config
configure:20157: result:   GDAL version:         2.2.1
configure:20161: result:   SFCGAL config:        /projects/CGAL/rel-sfcgal-1.3.0w64gcc48/bin/sfcgal-config
configure:20163: result:   SFCGAL version:       1.3.0
configure:20167: result:   PostgreSQL config:    /projects/postgresql/rel/pg9.4w64gcc48/bin/pg_config
configure:20169: result:   PostgreSQL version:   PostgreSQL 9.4.5
configure:20175: result:   PROJ4 version:        49
configure:20177: result:   Libxml2 config:       /projects/libxml/rel-libxml2-2.7.8w64gcc48/bin/xml2-config
configure:20179: result:   Libxml2 version:      2.7.8
configure:20181: result:   JSON-C support:       yes
configure:20183: result:   protobuf-c support:   yes
configure:20185: result:   PCRE support:         yes
configure:20187: result:   PostGIS debug level:  0
configure:20189: result:   Perl:                 /usr/bin/perl
configure:20191: result:
configure:20193: result:  --------------- Extensions ---------------
configure:20196: result:   PostGIS Raster:       enabled
configure:20204: result:   PostGIS Topology:     enabled
configure:20211: result:   SFCGAL support:       enabled
configure:20219: result:   Address Standardizer support:       enabled
configure:20225: result:
configure:20227: result:  -------- Documentation Generation --------
configure:20229: result:   xsltproc:             /projects/xsltproc/xsltproc
configure:20231: result:   xsl style sheets:     /projects/docbook/docbook-xsl-1.76.1
configure:20233: result:   dblatex:              
configure:20235: result:   convert:              /c/Windows/System32/convert
configure:20237: result:   mathml2.dtd:          http://www.w3.org/Math/DTD/mathml2/mathml2.dtd



Do you get an output anything like this or does it just end after that terminated?

Thanks,
Regina






-----Original Message-----
From: postgis-users [mailto:[hidden email]] On Behalf Of Sandeep Gupta
Sent: Friday, July 07, 2017 8:36 PM
To: PostGIS Users Discussion <[hidden email]>
Subject: Re: [postgis-users] compiling from source code

Autoconf was missing, so I went ahead install autoconf, automake, and libtool.

Tried recompiling.

sh autogen.sh outputs:
* Running /home/linuxbrew/.linuxbrew/bin/glibtoolize (2.4.6)
   OPTIONS = --force --copy --install
glibtoolize: putting auxiliary files in '.'.
glibtoolize: copying file './config.guess'
glibtoolize: copying file './config.sub'
glibtoolize: copying file './install-sh'
glibtoolize: copying file './ltmain.sh'
glibtoolize: putting macros in AC_CONFIG_MACRO_DIRS, 'macros'.
glibtoolize: copying file 'macros/libtool.m4'
glibtoolize: copying file 'macros/ltoptions.m4'
glibtoolize: copying file 'macros/ltsugar.m4'
glibtoolize: copying file 'macros/ltversion.m4'
glibtoolize: copying file 'macros/lt~obsolete.m4'
glibtoolize: Consider adding '-I macros' to ACLOCAL_AMFLAGS in Makefile.am.
* Running /home/linuxbrew/.linuxbrew/bin/aclocal (1.15.1)
* Running /home/linuxbrew/.linuxbrew/bin/autoconf (2.69) ======================================
Now you are ready to run './configure'
======================================

This does not solve though. When I run ./configure same error appears with -V flag being the issue.

-sandeep







On Fri, Jul 7, 2017 at 6:33 PM, Regina Obe <[hidden email]> wrote:

> Okay I just got an irc note from Even Roualt.  He is running Ubuntu
> 16.04 and gcc 5.4  and had no issue running
>
> sh autogen.sh
> ./configure
>
> So doesn't seem like it's a newer gcc issue unless if its 5.3 specific.
>
> I'm suspecting something with brew,  MacOS, or tool chain like autoconf.
>
> What does:
>
> autoconf --version
>
> Return?
>
> I get
>
> autoconf (GNU Autoconf) 2.69
> Copyright (C) 2012 Free Software Foundation, Inc.
> License GPLv3+/Autoconf: GNU GPL version 3 or later
>
> Thanks,
> Regina
>
> -----Original Message-----
> From: postgis-users [mailto:[hidden email]] On
> Behalf Of Sandeep Gupta
> Sent: Friday, July 07, 2017 6:18 PM
> To: PostGIS Users Discussion <[hidden email]>
> Subject: Re: [postgis-users] compiling from source code
>
> Hi Regina,
>
>  Here is the output for gcc -v (install gcc from linuxbrew, which port of brew package manager of macOS):
>
> Reading specs from
> /home/linuxbrew/.linuxbrew/Cellar/gcc/5.3.0/lib/gcc/x86_64-unknown-lin
> ux-gnu/5.3.0/specs
> COLLECT_GCC=gcc
> COLLECT_LTO_WRAPPER=/home/linuxbrew/.linuxbrew/Cellar/gcc/5.3.0/libexe
> c/gcc/x86_64-unknown-linux-gnu/5.3.0/lto-wrapper
> Target: x86_64-unknown-linux-gnu
> Configured with: ../configure
> --prefix=/home/linuxbrew/.linuxbrew/Cellar/gcc/5.3.0
> --enable-languages=c,c++,objc,obj-c++,fortran --program-suffix=-5
> --with-gmp=/home/linuxbrew/.linuxbrew/opt/gmp
> --with-mpfr=/home/linuxbrew/.linuxbrew/opt/mpfr
> --with-mpc=/home/linuxbrew/.linuxbrew/opt/libmpc
> --with-isl=/home/linuxbrew/.linuxbrew/opt/isl --with-system-zlib --enable-libstdcxx-time=yes --enable-stage1-checking --enable-checking=release --enable-lto --with-build-config=bootstrap-debug --disable-werror --with-pkgversion='Homebrew gcc 5.3.0'
> --with-bugurl=https://github.com/Homebrew/homebrew/issues
> --enable-plugin --disable-nls --disable-multilib Thread model: posix
> gcc version 5.3.0 (Homebrew gcc 5.3.0)
>
>
> Thanks.
> sandeep
>
>
>
> On Fri, Jul 7, 2017 at 5:52 PM, Regina Obe <[hidden email]> wrote:
>> Steve and Sandeep,
>>
>> Can you try gcc -v instead and let me know what that outputs?
>>
>> I just checked our Debian PostGIS bot, and she's running gcc 5.2.1  and think she's running the newest of any of our bots . So I can 't rule out a newer gcc at fault here.
>> However if I do gcc -V, I get an error on her too, so that's not the issue here:
>> --
>>
>> gcc: error: unrecognized command line option  ?~-V ?T
>> gcc: fatal error: no input files
>> compilation terminated.
>>
>> However, lower case -v  (which is what I think configure uses, works just fine).
>>
>> gcc -v
>>
>> outputs:
>> Using built-in specs.
>> COLLECT_GCC=gcc
>> COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-linux-gnu/5/lto-wrapper
>> Target: x86_64-linux-gnu
>> Configured with: ../src/configure -v --with-pkgversion='Debian
>> 5.2.1-22' --with-bugurl=file:///usr/share/doc/gcc-5/README.Bugs
>> --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++
>> --prefix=/usr --program-suffix=-5 --enable-shared --ena
>> jar-dir=/usr/lib/jvm-exports/java-1.5.0-gcj-5-amd64
>> --with-arch-directory=amd64
>> --with-ecj-jar=/usr/share/java/eclipse-ecj.jar --enable-objc-gc
>> --enable-multiarch --with-arch-32=i586 --with-abi=m64
>> --with-multilib-list=m32,m64,mx32 --enable-m Thread model: posix gcc
>> version 5.2.1 20151010 (Debian 5.2.1-22)
>>
>>
>> I'm not sure where Sandeep's   gcc -V is coming from in configure, cause it looks like gcc -v works fine on his system too, but then somewhere down the line switches to upper case -V which is not a valid switch command even in lower gcc versions.
>>
>>
>>
>>
>> Thanks,
>> Regina
>>
>> -----
>> From: Stephen Woodbridge Date: Fri, Jul 7, 2017 at 2:09 PM
>>
>>
>>
>> I get the same error running on Ubuntu 16.04 with:
>>
>> $ gcc -V
>> gcc: error: unrecognized command line option  -V
>> gcc: fatal error: no input files
>> compilation terminated.
>>
>> Looks like the option should be --version $ gcc --version gcc (Ubuntu
>> 5.4.0-6ubuntu1~16.04.4) 5.4.0 20160609 Copyright (C) 2015 Free
>> Software Foundation, Inc.
>> This is free software; see the source for copying conditions.  There
>> is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
>>
>> -Steve
>>
>> On 7/7/2017 1:51 PM, Sandeep Gupta wrote:
>> Hi,
>>
>> I am using gcc version 5.3 to compile postgis on Fedora.
>> The compile  fails at the configure step.
>>
>> I get the error:
>>
>> configure: error: C preprocessor "gcc" fails sanity check See
>> `config.log' for more details
>>
>> The relevant line in config.log:
>> configure:3031: gcc -v >&5
>> Reading specs from
>> /home/linuxbrew/.linuxbrew/Cellar/gcc/5.3.0/lib/gcc/x86_64-unknown-li
>> n
>> ux-gnu/5.3.0/specs
>> COLLECT_GCC=gcc
>> COLLECT_LTO_WRAPPER=/home/linuxbrew/.linuxbrew/Cellar/gcc/5.3.0/libex
>> e c/gcc/x86_64-unknown-linux-gnu/5.3.0/lto-wrapper
>> Target: x86_64-unknown-linux-gnu
>> Configured with: ../configure
>> --prefix=/home/linuxbrew/.linuxbrew/Cellar/gcc/5.3.0
>> --enable-languages=c,c++,objc,obj-c++,fortran --program-suffix=-5
>> --with-gmp=/home/linuxbrew/.linuxbrew/opt/gmp
>> --with-mpfr=/home/linuxbrew/.linuxbrew/opt/mpfr
>> --with-mpc=/home/linuxbrew/.linuxbrew/opt/libmpc
>> --with-isl=/home/linuxbrew/.linuxbrew/opt/isl --with-system-zlib
>> --enable-libstdcxx-time=yes --enable-stage1-checking
>> --enable-checking=release --enable-lto
>> --with-build-config=bootstrap-debug --disable-werror
>> --with-pkgversion='Homebrew gcc 5.3.0'
>> --with-bugurl=https://github.com/Homebrew/homebrew/issues
>> --enable-plugin --disable-nls --disable-multilib Thread model: posix
>> gcc version 5.3.0 (Homebrew gcc 5.3.0)
>> configure:3042: $? = 0
>> configure:3031: gcc -V >&5
>> gcc: error: unrecognized command line option '-V'
>> gcc: fatal error: no input files
>> compilation terminated.
>>
>>
>>
>> It seems gcc does not like "-V" option. I this a issue to with later
>> gcc versions?
>>
>> Thanks.
>> sandeep
>> _______________________________________________
>> postgis-users mailing list
>> [hidden email]
>> https://lists.osgeo.org/mailman/listinfo/postgis-users
>>
>>
>> ---
>> This email has been checked for viruses by Avast antivirus software.
>> https://www.avast.com/antivirus
>>
>> _______________________________________________
>> postgis-users mailing list
>> [hidden email]
>> https://lists.osgeo.org/mailman/listinfo/postgis-users
>>
>>
>> _______________________________________________
>> postgis-users mailing list
>> [hidden email]
>> https://lists.osgeo.org/mailman/listinfo/postgis-users
> _______________________________________________
> postgis-users mailing list
> [hidden email]
> https://lists.osgeo.org/mailman/listinfo/postgis-users
>
> _______________________________________________
> postgis-users mailing list
> [hidden email]
> https://lists.osgeo.org/mailman/listinfo/postgis-users
_______________________________________________
postgis-users mailing list
[hidden email]
https://lists.osgeo.org/mailman/listinfo/postgis-users

_______________________________________________
postgis-users mailing list
[hidden email]
https://lists.osgeo.org/mailman/listinfo/postgis-users
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: compiling from source code

Sandeep Gupta
Hi Regina,

 I tried several version of postgis (2.3.3, 2.4.0dev, 2.1.8). I have
pkg_config installed on my system.

 The error I get is:
checking how to run the C preprocessor... gcc
configure: error: in `/home/sandeep/.cache/Homebrew/postgis-2.3.3':
configure: error: C preprocessor "gcc" fails sanity check

The configure doesn't proceed after this in my case.

Is there any temporary workaround that you suggest I can try?

Thanks.
sandeep


On Sat, Jul 8, 2017 at 7:40 PM, Regina Obe <[hidden email]> wrote:

> Sandeep,
>
> Which version of PostGIS are you trying to build?  Your configure might be ending for another reason.  For example in PostGIS 2.4, I think we now have a dependency on pkg-config which older versions of PostGIS do not.  We'll sort this out before PostGIS release, but I think downside at moment, is the it fails if pkg-config is not installed.  I forget the exact error you get.
>
> I looked around on net for the -V and from what I can tell, that error is harmless and is just part of the process of configure checking the capabilities of the gcc compile.
> I checked my own config.log and see the same error
>
> configure:2948: x86_64-w64-mingw32-gcc -V >&5
> x86_64-w64-mingw32-gcc.exe: error: unrecognized command line option '-V'
> x86_64-w64-mingw32-gcc.exe: fatal error: no input files
> compilation terminated.
>
> But my configure continues, works fine and in the end shows this:
>
> configure:20134: result:
> configure:20136: result:   PostGIS is now configured for x86_64-w64-mingw32
> configure:20138: result:
> configure:20140: result:  -------------- Compiler Info -------------
> configure:20142: result:   C compiler:           x86_64-w64-mingw32-gcc -g -O2
> configure:20144: result:   SQL preprocessor:     /mingw64/bin/cpp -traditional-cpp -w -P
> configure:20146: result:
> configure:20148: result:  -------------- Dependencies --------------
> configure:20150: result:   GEOS config:          /projects/geos/rel-3.7.0devw64gcc48/bin/geos-config
> configure:20152: result:   GEOS version:         3.7.0dev
> configure:20155: result:   GDAL config:          /projects/gdal/rel-2.2.1w64gcc48/bin/gdal-config
> configure:20157: result:   GDAL version:         2.2.1
> configure:20161: result:   SFCGAL config:        /projects/CGAL/rel-sfcgal-1.3.0w64gcc48/bin/sfcgal-config
> configure:20163: result:   SFCGAL version:       1.3.0
> configure:20167: result:   PostgreSQL config:    /projects/postgresql/rel/pg9.4w64gcc48/bin/pg_config
> configure:20169: result:   PostgreSQL version:   PostgreSQL 9.4.5
> configure:20175: result:   PROJ4 version:        49
> configure:20177: result:   Libxml2 config:       /projects/libxml/rel-libxml2-2.7.8w64gcc48/bin/xml2-config
> configure:20179: result:   Libxml2 version:      2.7.8
> configure:20181: result:   JSON-C support:       yes
> configure:20183: result:   protobuf-c support:   yes
> configure:20185: result:   PCRE support:         yes
> configure:20187: result:   PostGIS debug level:  0
> configure:20189: result:   Perl:                 /usr/bin/perl
> configure:20191: result:
> configure:20193: result:  --------------- Extensions ---------------
> configure:20196: result:   PostGIS Raster:       enabled
> configure:20204: result:   PostGIS Topology:     enabled
> configure:20211: result:   SFCGAL support:       enabled
> configure:20219: result:   Address Standardizer support:       enabled
> configure:20225: result:
> configure:20227: result:  -------- Documentation Generation --------
> configure:20229: result:   xsltproc:             /projects/xsltproc/xsltproc
> configure:20231: result:   xsl style sheets:     /projects/docbook/docbook-xsl-1.76.1
> configure:20233: result:   dblatex:
> configure:20235: result:   convert:              /c/Windows/System32/convert
> configure:20237: result:   mathml2.dtd:          http://www.w3.org/Math/DTD/mathml2/mathml2.dtd
>
>
>
> Do you get an output anything like this or does it just end after that terminated?
>
> Thanks,
> Regina
>
>
>
>
>
>
> -----Original Message-----
> From: postgis-users [mailto:[hidden email]] On Behalf Of Sandeep Gupta
> Sent: Friday, July 07, 2017 8:36 PM
> To: PostGIS Users Discussion <[hidden email]>
> Subject: Re: [postgis-users] compiling from source code
>
> Autoconf was missing, so I went ahead install autoconf, automake, and libtool.
>
> Tried recompiling.
>
> sh autogen.sh outputs:
> * Running /home/linuxbrew/.linuxbrew/bin/glibtoolize (2.4.6)
>    OPTIONS = --force --copy --install
> glibtoolize: putting auxiliary files in '.'.
> glibtoolize: copying file './config.guess'
> glibtoolize: copying file './config.sub'
> glibtoolize: copying file './install-sh'
> glibtoolize: copying file './ltmain.sh'
> glibtoolize: putting macros in AC_CONFIG_MACRO_DIRS, 'macros'.
> glibtoolize: copying file 'macros/libtool.m4'
> glibtoolize: copying file 'macros/ltoptions.m4'
> glibtoolize: copying file 'macros/ltsugar.m4'
> glibtoolize: copying file 'macros/ltversion.m4'
> glibtoolize: copying file 'macros/lt~obsolete.m4'
> glibtoolize: Consider adding '-I macros' to ACLOCAL_AMFLAGS in Makefile.am.
> * Running /home/linuxbrew/.linuxbrew/bin/aclocal (1.15.1)
> * Running /home/linuxbrew/.linuxbrew/bin/autoconf (2.69) ======================================
> Now you are ready to run './configure'
> ======================================
>
> This does not solve though. When I run ./configure same error appears with -V flag being the issue.
>
> -sandeep
>
>
>
>
>
>
>
> On Fri, Jul 7, 2017 at 6:33 PM, Regina Obe <[hidden email]> wrote:
>> Okay I just got an irc note from Even Roualt.  He is running Ubuntu
>> 16.04 and gcc 5.4  and had no issue running
>>
>> sh autogen.sh
>> ./configure
>>
>> So doesn't seem like it's a newer gcc issue unless if its 5.3 specific.
>>
>> I'm suspecting something with brew,  MacOS, or tool chain like autoconf.
>>
>> What does:
>>
>> autoconf --version
>>
>> Return?
>>
>> I get
>>
>> autoconf (GNU Autoconf) 2.69
>> Copyright (C) 2012 Free Software Foundation, Inc.
>> License GPLv3+/Autoconf: GNU GPL version 3 or later
>>
>> Thanks,
>> Regina
>>
>> -----Original Message-----
>> From: postgis-users [mailto:[hidden email]] On
>> Behalf Of Sandeep Gupta
>> Sent: Friday, July 07, 2017 6:18 PM
>> To: PostGIS Users Discussion <[hidden email]>
>> Subject: Re: [postgis-users] compiling from source code
>>
>> Hi Regina,
>>
>>  Here is the output for gcc -v (install gcc from linuxbrew, which port of brew package manager of macOS):
>>
>> Reading specs from
>> /home/linuxbrew/.linuxbrew/Cellar/gcc/5.3.0/lib/gcc/x86_64-unknown-lin
>> ux-gnu/5.3.0/specs
>> COLLECT_GCC=gcc
>> COLLECT_LTO_WRAPPER=/home/linuxbrew/.linuxbrew/Cellar/gcc/5.3.0/libexe
>> c/gcc/x86_64-unknown-linux-gnu/5.3.0/lto-wrapper
>> Target: x86_64-unknown-linux-gnu
>> Configured with: ../configure
>> --prefix=/home/linuxbrew/.linuxbrew/Cellar/gcc/5.3.0
>> --enable-languages=c,c++,objc,obj-c++,fortran --program-suffix=-5
>> --with-gmp=/home/linuxbrew/.linuxbrew/opt/gmp
>> --with-mpfr=/home/linuxbrew/.linuxbrew/opt/mpfr
>> --with-mpc=/home/linuxbrew/.linuxbrew/opt/libmpc
>> --with-isl=/home/linuxbrew/.linuxbrew/opt/isl --with-system-zlib --enable-libstdcxx-time=yes --enable-stage1-checking --enable-checking=release --enable-lto --with-build-config=bootstrap-debug --disable-werror --with-pkgversion='Homebrew gcc 5.3.0'
>> --with-bugurl=https://github.com/Homebrew/homebrew/issues
>> --enable-plugin --disable-nls --disable-multilib Thread model: posix
>> gcc version 5.3.0 (Homebrew gcc 5.3.0)
>>
>>
>> Thanks.
>> sandeep
>>
>>
>>
>> On Fri, Jul 7, 2017 at 5:52 PM, Regina Obe <[hidden email]> wrote:
>>> Steve and Sandeep,
>>>
>>> Can you try gcc -v instead and let me know what that outputs?
>>>
>>> I just checked our Debian PostGIS bot, and she's running gcc 5.2.1  and think she's running the newest of any of our bots . So I can 't rule out a newer gcc at fault here.
>>> However if I do gcc -V, I get an error on her too, so that's not the issue here:
>>> --
>>>
>>> gcc: error: unrecognized command line option  ?~-V ?T
>>> gcc: fatal error: no input files
>>> compilation terminated.
>>>
>>> However, lower case -v  (which is what I think configure uses, works just fine).
>>>
>>> gcc -v
>>>
>>> outputs:
>>> Using built-in specs.
>>> COLLECT_GCC=gcc
>>> COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-linux-gnu/5/lto-wrapper
>>> Target: x86_64-linux-gnu
>>> Configured with: ../src/configure -v --with-pkgversion='Debian
>>> 5.2.1-22' --with-bugurl=file:///usr/share/doc/gcc-5/README.Bugs
>>> --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++
>>> --prefix=/usr --program-suffix=-5 --enable-shared --ena
>>> jar-dir=/usr/lib/jvm-exports/java-1.5.0-gcj-5-amd64
>>> --with-arch-directory=amd64
>>> --with-ecj-jar=/usr/share/java/eclipse-ecj.jar --enable-objc-gc
>>> --enable-multiarch --with-arch-32=i586 --with-abi=m64
>>> --with-multilib-list=m32,m64,mx32 --enable-m Thread model: posix gcc
>>> version 5.2.1 20151010 (Debian 5.2.1-22)
>>>
>>>
>>> I'm not sure where Sandeep's   gcc -V is coming from in configure, cause it looks like gcc -v works fine on his system too, but then somewhere down the line switches to upper case -V which is not a valid switch command even in lower gcc versions.
>>>
>>>
>>>
>>>
>>> Thanks,
>>> Regina
>>>
>>> -----
>>> From: Stephen Woodbridge Date: Fri, Jul 7, 2017 at 2:09 PM
>>>
>>>
>>>
>>> I get the same error running on Ubuntu 16.04 with:
>>>
>>> $ gcc -V
>>> gcc: error: unrecognized command line option  -V
>>> gcc: fatal error: no input files
>>> compilation terminated.
>>>
>>> Looks like the option should be --version $ gcc --version gcc (Ubuntu
>>> 5.4.0-6ubuntu1~16.04.4) 5.4.0 20160609 Copyright (C) 2015 Free
>>> Software Foundation, Inc.
>>> This is free software; see the source for copying conditions.  There
>>> is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
>>>
>>> -Steve
>>>
>>> On 7/7/2017 1:51 PM, Sandeep Gupta wrote:
>>> Hi,
>>>
>>> I am using gcc version 5.3 to compile postgis on Fedora.
>>> The compile  fails at the configure step.
>>>
>>> I get the error:
>>>
>>> configure: error: C preprocessor "gcc" fails sanity check See
>>> `config.log' for more details
>>>
>>> The relevant line in config.log:
>>> configure:3031: gcc -v >&5
>>> Reading specs from
>>> /home/linuxbrew/.linuxbrew/Cellar/gcc/5.3.0/lib/gcc/x86_64-unknown-li
>>> n
>>> ux-gnu/5.3.0/specs
>>> COLLECT_GCC=gcc
>>> COLLECT_LTO_WRAPPER=/home/linuxbrew/.linuxbrew/Cellar/gcc/5.3.0/libex
>>> e c/gcc/x86_64-unknown-linux-gnu/5.3.0/lto-wrapper
>>> Target: x86_64-unknown-linux-gnu
>>> Configured with: ../configure
>>> --prefix=/home/linuxbrew/.linuxbrew/Cellar/gcc/5.3.0
>>> --enable-languages=c,c++,objc,obj-c++,fortran --program-suffix=-5
>>> --with-gmp=/home/linuxbrew/.linuxbrew/opt/gmp
>>> --with-mpfr=/home/linuxbrew/.linuxbrew/opt/mpfr
>>> --with-mpc=/home/linuxbrew/.linuxbrew/opt/libmpc
>>> --with-isl=/home/linuxbrew/.linuxbrew/opt/isl --with-system-zlib
>>> --enable-libstdcxx-time=yes --enable-stage1-checking
>>> --enable-checking=release --enable-lto
>>> --with-build-config=bootstrap-debug --disable-werror
>>> --with-pkgversion='Homebrew gcc 5.3.0'
>>> --with-bugurl=https://github.com/Homebrew/homebrew/issues
>>> --enable-plugin --disable-nls --disable-multilib Thread model: posix
>>> gcc version 5.3.0 (Homebrew gcc 5.3.0)
>>> configure:3042: $? = 0
>>> configure:3031: gcc -V >&5
>>> gcc: error: unrecognized command line option '-V'
>>> gcc: fatal error: no input files
>>> compilation terminated.
>>>
>>>
>>>
>>> It seems gcc does not like "-V" option. I this a issue to with later
>>> gcc versions?
>>>
>>> Thanks.
>>> sandeep
>>> _______________________________________________
>>> postgis-users mailing list
>>> [hidden email]
>>> https://lists.osgeo.org/mailman/listinfo/postgis-users
>>>
>>>
>>> ---
>>> This email has been checked for viruses by Avast antivirus software.
>>> https://www.avast.com/antivirus
>>>
>>> _______________________________________________
>>> postgis-users mailing list
>>> [hidden email]
>>> https://lists.osgeo.org/mailman/listinfo/postgis-users
>>>
>>>
>>> _______________________________________________
>>> postgis-users mailing list
>>> [hidden email]
>>> https://lists.osgeo.org/mailman/listinfo/postgis-users
>> _______________________________________________
>> postgis-users mailing list
>> [hidden email]
>> https://lists.osgeo.org/mailman/listinfo/postgis-users
>>
>> _______________________________________________
>> postgis-users mailing list
>> [hidden email]
>> https://lists.osgeo.org/mailman/listinfo/postgis-users
> _______________________________________________
> postgis-users mailing list
> [hidden email]
> https://lists.osgeo.org/mailman/listinfo/postgis-users
>
> _______________________________________________
> postgis-users mailing list
> [hidden email]
> https://lists.osgeo.org/mailman/listinfo/postgis-users
_______________________________________________
postgis-users mailing list
[hidden email]
https://lists.osgeo.org/mailman/listinfo/postgis-users
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: compiling from source code

Regina Obe-2
Sandeep,

Sounds like you might be having the same issue described here:

https://stackoverflow.com/questions/23338713/homebrew-how-to-permanently-override-homebrew-cc-homebrew-cxx-env-settings

Does the suggested answer work.  

Thanks,
Regina

-----Original Message-----
From: postgis-users [mailto:[hidden email]] On Behalf Of Sandeep Gupta
Sent: Monday, July 10, 2017 2:12 PM
To: PostGIS Users Discussion <[hidden email]>
Subject: Re: [postgis-users] compiling from source code

Hi Regina,

 I tried several version of postgis (2.3.3, 2.4.0dev, 2.1.8). I have pkg_config installed on my system.

 The error I get is:
checking how to run the C preprocessor... gcc
configure: error: in `/home/sandeep/.cache/Homebrew/postgis-2.3.3':
configure: error: C preprocessor "gcc" fails sanity check

The configure doesn't proceed after this in my case.

Is there any temporary workaround that you suggest I can try?

Thanks.
sandeep


On Sat, Jul 8, 2017 at 7:40 PM, Regina Obe <[hidden email]> wrote:

> Sandeep,
>
> Which version of PostGIS are you trying to build?  Your configure might be ending for another reason.  For example in PostGIS 2.4, I think we now have a dependency on pkg-config which older versions of PostGIS do not.  We'll sort this out before PostGIS release, but I think downside at moment, is the it fails if pkg-config is not installed.  I forget the exact error you get.
>
> I looked around on net for the -V and from what I can tell, that error is harmless and is just part of the process of configure checking the capabilities of the gcc compile.
> I checked my own config.log and see the same error
>
> configure:2948: x86_64-w64-mingw32-gcc -V >&5
> x86_64-w64-mingw32-gcc.exe: error: unrecognized command line option '-V'
> x86_64-w64-mingw32-gcc.exe: fatal error: no input files compilation
> terminated.
>
> But my configure continues, works fine and in the end shows this:
>
> configure:20134: result:
> configure:20136: result:   PostGIS is now configured for x86_64-w64-mingw32
> configure:20138: result:
> configure:20140: result:  -------------- Compiler Info -------------
> configure:20142: result:   C compiler:           x86_64-w64-mingw32-gcc -g -O2
> configure:20144: result:   SQL preprocessor:     /mingw64/bin/cpp -traditional-cpp -w -P
> configure:20146: result:
> configure:20148: result:  -------------- Dependencies --------------
> configure:20150: result:   GEOS config:          /projects/geos/rel-3.7.0devw64gcc48/bin/geos-config
> configure:20152: result:   GEOS version:         3.7.0dev
> configure:20155: result:   GDAL config:          /projects/gdal/rel-2.2.1w64gcc48/bin/gdal-config
> configure:20157: result:   GDAL version:         2.2.1
> configure:20161: result:   SFCGAL config:        /projects/CGAL/rel-sfcgal-1.3.0w64gcc48/bin/sfcgal-config
> configure:20163: result:   SFCGAL version:       1.3.0
> configure:20167: result:   PostgreSQL config:    /projects/postgresql/rel/pg9.4w64gcc48/bin/pg_config
> configure:20169: result:   PostgreSQL version:   PostgreSQL 9.4.5
> configure:20175: result:   PROJ4 version:        49
> configure:20177: result:   Libxml2 config:       /projects/libxml/rel-libxml2-2.7.8w64gcc48/bin/xml2-config
> configure:20179: result:   Libxml2 version:      2.7.8
> configure:20181: result:   JSON-C support:       yes
> configure:20183: result:   protobuf-c support:   yes
> configure:20185: result:   PCRE support:         yes
> configure:20187: result:   PostGIS debug level:  0
> configure:20189: result:   Perl:                 /usr/bin/perl
> configure:20191: result:
> configure:20193: result:  --------------- Extensions ---------------
> configure:20196: result:   PostGIS Raster:       enabled
> configure:20204: result:   PostGIS Topology:     enabled
> configure:20211: result:   SFCGAL support:       enabled
> configure:20219: result:   Address Standardizer support:       enabled
> configure:20225: result:
> configure:20227: result:  -------- Documentation Generation --------
> configure:20229: result:   xsltproc:             /projects/xsltproc/xsltproc
> configure:20231: result:   xsl style sheets:     /projects/docbook/docbook-xsl-1.76.1
> configure:20233: result:   dblatex:
> configure:20235: result:   convert:              /c/Windows/System32/convert
> configure:20237: result:   mathml2.dtd:          http://www.w3.org/Math/DTD/mathml2/mathml2.dtd
>
>
>
> Do you get an output anything like this or does it just end after that terminated?
>
> Thanks,
> Regina
>
>
>
>
>
>
> -----Original Message-----
> From: postgis-users [mailto:[hidden email]] On
> Behalf Of Sandeep Gupta
> Sent: Friday, July 07, 2017 8:36 PM
> To: PostGIS Users Discussion <[hidden email]>
> Subject: Re: [postgis-users] compiling from source code
>
> Autoconf was missing, so I went ahead install autoconf, automake, and libtool.
>
> Tried recompiling.
>
> sh autogen.sh outputs:
> * Running /home/linuxbrew/.linuxbrew/bin/glibtoolize (2.4.6)
>    OPTIONS = --force --copy --install
> glibtoolize: putting auxiliary files in '.'.
> glibtoolize: copying file './config.guess'
> glibtoolize: copying file './config.sub'
> glibtoolize: copying file './install-sh'
> glibtoolize: copying file './ltmain.sh'
> glibtoolize: putting macros in AC_CONFIG_MACRO_DIRS, 'macros'.
> glibtoolize: copying file 'macros/libtool.m4'
> glibtoolize: copying file 'macros/ltoptions.m4'
> glibtoolize: copying file 'macros/ltsugar.m4'
> glibtoolize: copying file 'macros/ltversion.m4'
> glibtoolize: copying file 'macros/lt~obsolete.m4'
> glibtoolize: Consider adding '-I macros' to ACLOCAL_AMFLAGS in Makefile.am.
> * Running /home/linuxbrew/.linuxbrew/bin/aclocal (1.15.1)
> * Running /home/linuxbrew/.linuxbrew/bin/autoconf (2.69)
> ======================================
> Now you are ready to run './configure'
> ======================================
>
> This does not solve though. When I run ./configure same error appears with -V flag being the issue.
>
> -sandeep
>
>
>
>
>
>
>
> On Fri, Jul 7, 2017 at 6:33 PM, Regina Obe <[hidden email]> wrote:
>> Okay I just got an irc note from Even Roualt.  He is running Ubuntu
>> 16.04 and gcc 5.4  and had no issue running
>>
>> sh autogen.sh
>> ./configure
>>
>> So doesn't seem like it's a newer gcc issue unless if its 5.3 specific.
>>
>> I'm suspecting something with brew,  MacOS, or tool chain like autoconf.
>>
>> What does:
>>
>> autoconf --version
>>
>> Return?
>>
>> I get
>>
>> autoconf (GNU Autoconf) 2.69
>> Copyright (C) 2012 Free Software Foundation, Inc.
>> License GPLv3+/Autoconf: GNU GPL version 3 or later
>>
>> Thanks,
>> Regina
>>
>> -----Original Message-----
>> From: postgis-users [mailto:[hidden email]] On
>> Behalf Of Sandeep Gupta
>> Sent: Friday, July 07, 2017 6:18 PM
>> To: PostGIS Users Discussion <[hidden email]>
>> Subject: Re: [postgis-users] compiling from source code
>>
>> Hi Regina,
>>
>>  Here is the output for gcc -v (install gcc from linuxbrew, which port of brew package manager of macOS):
>>
>> Reading specs from
>> /home/linuxbrew/.linuxbrew/Cellar/gcc/5.3.0/lib/gcc/x86_64-unknown-li
>> n
>> ux-gnu/5.3.0/specs
>> COLLECT_GCC=gcc
>> COLLECT_LTO_WRAPPER=/home/linuxbrew/.linuxbrew/Cellar/gcc/5.3.0/libex
>> e c/gcc/x86_64-unknown-linux-gnu/5.3.0/lto-wrapper
>> Target: x86_64-unknown-linux-gnu
>> Configured with: ../configure
>> --prefix=/home/linuxbrew/.linuxbrew/Cellar/gcc/5.3.0
>> --enable-languages=c,c++,objc,obj-c++,fortran --program-suffix=-5
>> --with-gmp=/home/linuxbrew/.linuxbrew/opt/gmp
>> --with-mpfr=/home/linuxbrew/.linuxbrew/opt/mpfr
>> --with-mpc=/home/linuxbrew/.linuxbrew/opt/libmpc
>> --with-isl=/home/linuxbrew/.linuxbrew/opt/isl --with-system-zlib --enable-libstdcxx-time=yes --enable-stage1-checking --enable-checking=release --enable-lto --with-build-config=bootstrap-debug --disable-werror --with-pkgversion='Homebrew gcc 5.3.0'
>> --with-bugurl=https://github.com/Homebrew/homebrew/issues
>> --enable-plugin --disable-nls --disable-multilib Thread model: posix
>> gcc version 5.3.0 (Homebrew gcc 5.3.0)
>>
>>
>> Thanks.
>> sandeep
>>
>>
>>
>> On Fri, Jul 7, 2017 at 5:52 PM, Regina Obe <[hidden email]> wrote:
>>> Steve and Sandeep,
>>>
>>> Can you try gcc -v instead and let me know what that outputs?
>>>
>>> I just checked our Debian PostGIS bot, and she's running gcc 5.2.1  and think she's running the newest of any of our bots . So I can 't rule out a newer gcc at fault here.
>>> However if I do gcc -V, I get an error on her too, so that's not the issue here:
>>> --
>>>
>>> gcc: error: unrecognized command line option  ?~-V ?T
>>> gcc: fatal error: no input files
>>> compilation terminated.
>>>
>>> However, lower case -v  (which is what I think configure uses, works just fine).
>>>
>>> gcc -v
>>>
>>> outputs:
>>> Using built-in specs.
>>> COLLECT_GCC=gcc
>>> COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-linux-gnu/5/lto-wrapper
>>> Target: x86_64-linux-gnu
>>> Configured with: ../src/configure -v --with-pkgversion='Debian
>>> 5.2.1-22' --with-bugurl=file:///usr/share/doc/gcc-5/README.Bugs
>>> --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++
>>> --prefix=/usr --program-suffix=-5 --enable-shared --ena
>>> jar-dir=/usr/lib/jvm-exports/java-1.5.0-gcj-5-amd64
>>> --with-arch-directory=amd64
>>> --with-ecj-jar=/usr/share/java/eclipse-ecj.jar --enable-objc-gc
>>> --enable-multiarch --with-arch-32=i586 --with-abi=m64
>>> --with-multilib-list=m32,m64,mx32 --enable-m Thread model: posix gcc
>>> version 5.2.1 20151010 (Debian 5.2.1-22)
>>>
>>>
>>> I'm not sure where Sandeep's   gcc -V is coming from in configure, cause it looks like gcc -v works fine on his system too, but then somewhere down the line switches to upper case -V which is not a valid switch command even in lower gcc versions.
>>>
>>>
>>>
>>>
>>> Thanks,
>>> Regina
>>>
>>> -----
>>> From: Stephen Woodbridge Date: Fri, Jul 7, 2017 at 2:09 PM
>>>
>>>
>>>
>>> I get the same error running on Ubuntu 16.04 with:
>>>
>>> $ gcc -V
>>> gcc: error: unrecognized command line option  -V
>>> gcc: fatal error: no input files
>>> compilation terminated.
>>>
>>> Looks like the option should be --version $ gcc --version gcc
>>> (Ubuntu
>>> 5.4.0-6ubuntu1~16.04.4) 5.4.0 20160609 Copyright (C) 2015 Free
>>> Software Foundation, Inc.
>>> This is free software; see the source for copying conditions.  There
>>> is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
>>>
>>> -Steve
>>>
>>> On 7/7/2017 1:51 PM, Sandeep Gupta wrote:
>>> Hi,
>>>
>>> I am using gcc version 5.3 to compile postgis on Fedora.
>>> The compile  fails at the configure step.
>>>
>>> I get the error:
>>>
>>> configure: error: C preprocessor "gcc" fails sanity check See
>>> `config.log' for more details
>>>
>>> The relevant line in config.log:
>>> configure:3031: gcc -v >&5
>>> Reading specs from
>>> /home/linuxbrew/.linuxbrew/Cellar/gcc/5.3.0/lib/gcc/x86_64-unknown-l
>>> i
>>> n
>>> ux-gnu/5.3.0/specs
>>> COLLECT_GCC=gcc
>>> COLLECT_LTO_WRAPPER=/home/linuxbrew/.linuxbrew/Cellar/gcc/5.3.0/libe
>>> x e c/gcc/x86_64-unknown-linux-gnu/5.3.0/lto-wrapper
>>> Target: x86_64-unknown-linux-gnu
>>> Configured with: ../configure
>>> --prefix=/home/linuxbrew/.linuxbrew/Cellar/gcc/5.3.0
>>> --enable-languages=c,c++,objc,obj-c++,fortran --program-suffix=-5
>>> --with-gmp=/home/linuxbrew/.linuxbrew/opt/gmp
>>> --with-mpfr=/home/linuxbrew/.linuxbrew/opt/mpfr
>>> --with-mpc=/home/linuxbrew/.linuxbrew/opt/libmpc
>>> --with-isl=/home/linuxbrew/.linuxbrew/opt/isl --with-system-zlib
>>> --enable-libstdcxx-time=yes --enable-stage1-checking
>>> --enable-checking=release --enable-lto
>>> --with-build-config=bootstrap-debug --disable-werror
>>> --with-pkgversion='Homebrew gcc 5.3.0'
>>> --with-bugurl=https://github.com/Homebrew/homebrew/issues
>>> --enable-plugin --disable-nls --disable-multilib Thread model: posix
>>> gcc version 5.3.0 (Homebrew gcc 5.3.0)
>>> configure:3042: $? = 0
>>> configure:3031: gcc -V >&5
>>> gcc: error: unrecognized command line option '-V'
>>> gcc: fatal error: no input files
>>> compilation terminated.
>>>
>>>
>>>
>>> It seems gcc does not like "-V" option. I this a issue to with later
>>> gcc versions?
>>>
>>> Thanks.
>>> sandeep
>>> _______________________________________________
>>> postgis-users mailing list
>>> [hidden email]
>>> https://lists.osgeo.org/mailman/listinfo/postgis-users
>>>
>>>
>>> ---
>>> This email has been checked for viruses by Avast antivirus software.
>>> https://www.avast.com/antivirus
>>>
>>> _______________________________________________
>>> postgis-users mailing list
>>> [hidden email]
>>> https://lists.osgeo.org/mailman/listinfo/postgis-users
>>>
>>>
>>> _______________________________________________
>>> postgis-users mailing list
>>> [hidden email]
>>> https://lists.osgeo.org/mailman/listinfo/postgis-users
>> _______________________________________________
>> postgis-users mailing list
>> [hidden email]
>> https://lists.osgeo.org/mailman/listinfo/postgis-users
>>
>> _______________________________________________
>> postgis-users mailing list
>> [hidden email]
>> https://lists.osgeo.org/mailman/listinfo/postgis-users
> _______________________________________________
> postgis-users mailing list
> [hidden email]
> https://lists.osgeo.org/mailman/listinfo/postgis-users
>
> _______________________________________________
> postgis-users mailing list
> [hidden email]
> https://lists.osgeo.org/mailman/listinfo/postgis-users
_______________________________________________
postgis-users mailing list
[hidden email]
https://lists.osgeo.org/mailman/listinfo/postgis-users

_______________________________________________
postgis-users mailing list
[hidden email]
https://lists.osgeo.org/mailman/listinfo/postgis-users
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: compiling from source code

Sandeep Gupta
It turned out the problem wasl related to compiling conftest.c:

configure:6858: gcc  conftest.c
conftest.c:14:8: error: unknown type name 'Syntax'
        Syntax error
        ^
conftest.c:14:8: error: expected '=', ',', ';', 'asm' or
'__attribute__' at end of input
configure:6858: $? = 1
configure: failed program was:
| /* confdefs.h */
| #define PACKAGE_NAME ""
| #define PACKAGE_TARNAME ""
| #define PACKAGE_VERSION ""
| #define PACKAGE_STRING ""
| #define PACKAGE_BUGREPORT ""
| #define PACKAGE_URL ""
| /* end confdefs.h.  */
| #ifdef __STDC__
| # include <limits.h>
| #else
| # include <assert.h>
| #endif
|                    Syntax error
configure:6858: gcc  conftest.c
conftest.c:14:8: error: unknown type name 'Syntax'
        Syntax error
        ^
conftest.c:14:8: error: expected '=', ',', ';', 'asm' or
'__attribute__' at end of input
configure:6858: $? = 1


It is related to the problem posted here:
https://stackoverflow.com/questions/15041937/configure-error-c-preprocessor-fails-sanity-check'

Passing -E option as follows fixes the problem ( i am not sure why):
./configure --prefix=/home/linuxbrew/.linuxbrew/Cellar/postgis/2.3.3
CC=/home/linuxbrew/.linuxbrew/bin/gcc
CXX=/home/linuxbrew/.linuxbrew/bin/g++
CPP='/home/linuxbrew/.linuxbrew/bin/g++ -E


However the compile fails here (this is for postgis 2.3.3):

make[1]: Entering directory
'/home/sandeep/.cache/Homebrew/postgis-2.3.3/postgis'
gcc-4.8 -I../liblwgeom  -fpic -I../libpgcommon
-I/home/linuxbrew/.linuxbrew/Cellar/geos/3.6.1/include
-I/home/linuxbrew/.linuxbrew/Cellar/libxml2/2.9.4_3/include/libxml2
-I/home/linuxbrew/.linuxbrew/Cellar/sfcgal/1.3.1/include -DHAVE_SFCGAL
   -fPIC -I/home/linuxbrew/.linuxbrew/Cellar/sfcgal/1.3.1/include
-DHAVE_SFCGAL -I. -I./
-I/home/linuxbrew/.linuxbrew/Cellar/postgresql/9.6.3/include/server
-I/home/linuxbrew/.linuxbrew/Cellar/postgresql/9.6.3/include/internal
-I/home/linuxbrew/.linuxbrew/opt/openssl/include
-I/home/linuxbrew/.linuxbrew/opt/readline/include -D_GNU_SOURCE
-I/home/linuxbrew/.linuxbrew/Cellar/libxml2/2.9.4_2/include/libxml2
-c -o postgis_module.o postgis_module.c
make[1]: gcc-4.8: Command not found
<builtin>: recipe for target 'postgis_module.o' failed
make[1]: *** [postgis_module.o] Error 127


I am not sure why the make is picking up gcc-4.8.

Thanks
sandeep



On Mon, Jul 10, 2017 at 2:42 PM, Regina Obe <[hidden email]> wrote:

> Sandeep,
>
> Sounds like you might be having the same issue described here:
>
> https://stackoverflow.com/questions/23338713/homebrew-how-to-permanently-override-homebrew-cc-homebrew-cxx-env-settings
>
> Does the suggested answer work.
>
> Thanks,
> Regina
>
> -----Original Message-----
> From: postgis-users [mailto:[hidden email]] On Behalf Of Sandeep Gupta
> Sent: Monday, July 10, 2017 2:12 PM
> To: PostGIS Users Discussion <[hidden email]>
> Subject: Re: [postgis-users] compiling from source code
>
> Hi Regina,
>
>  I tried several version of postgis (2.3.3, 2.4.0dev, 2.1.8). I have pkg_config installed on my system.
>
>  The error I get is:
> checking how to run the C preprocessor... gcc
> configure: error: in `/home/sandeep/.cache/Homebrew/postgis-2.3.3':
> configure: error: C preprocessor "gcc" fails sanity check
>
> The configure doesn't proceed after this in my case.
>
> Is there any temporary workaround that you suggest I can try?
>
> Thanks.
> sandeep
>
>
> On Sat, Jul 8, 2017 at 7:40 PM, Regina Obe <[hidden email]> wrote:
>> Sandeep,
>>
>> Which version of PostGIS are you trying to build?  Your configure might be ending for another reason.  For example in PostGIS 2.4, I think we now have a dependency on pkg-config which older versions of PostGIS do not.  We'll sort this out before PostGIS release, but I think downside at moment, is the it fails if pkg-config is not installed.  I forget the exact error you get.
>>
>> I looked around on net for the -V and from what I can tell, that error is harmless and is just part of the process of configure checking the capabilities of the gcc compile.
>> I checked my own config.log and see the same error
>>
>> configure:2948: x86_64-w64-mingw32-gcc -V >&5
>> x86_64-w64-mingw32-gcc.exe: error: unrecognized command line option '-V'
>> x86_64-w64-mingw32-gcc.exe: fatal error: no input files compilation
>> terminated.
>>
>> But my configure continues, works fine and in the end shows this:
>>
>> configure:20134: result:
>> configure:20136: result:   PostGIS is now configured for x86_64-w64-mingw32
>> configure:20138: result:
>> configure:20140: result:  -------------- Compiler Info -------------
>> configure:20142: result:   C compiler:           x86_64-w64-mingw32-gcc -g -O2
>> configure:20144: result:   SQL preprocessor:     /mingw64/bin/cpp -traditional-cpp -w -P
>> configure:20146: result:
>> configure:20148: result:  -------------- Dependencies --------------
>> configure:20150: result:   GEOS config:          /projects/geos/rel-3.7.0devw64gcc48/bin/geos-config
>> configure:20152: result:   GEOS version:         3.7.0dev
>> configure:20155: result:   GDAL config:          /projects/gdal/rel-2.2.1w64gcc48/bin/gdal-config
>> configure:20157: result:   GDAL version:         2.2.1
>> configure:20161: result:   SFCGAL config:        /projects/CGAL/rel-sfcgal-1.3.0w64gcc48/bin/sfcgal-config
>> configure:20163: result:   SFCGAL version:       1.3.0
>> configure:20167: result:   PostgreSQL config:    /projects/postgresql/rel/pg9.4w64gcc48/bin/pg_config
>> configure:20169: result:   PostgreSQL version:   PostgreSQL 9.4.5
>> configure:20175: result:   PROJ4 version:        49
>> configure:20177: result:   Libxml2 config:       /projects/libxml/rel-libxml2-2.7.8w64gcc48/bin/xml2-config
>> configure:20179: result:   Libxml2 version:      2.7.8
>> configure:20181: result:   JSON-C support:       yes
>> configure:20183: result:   protobuf-c support:   yes
>> configure:20185: result:   PCRE support:         yes
>> configure:20187: result:   PostGIS debug level:  0
>> configure:20189: result:   Perl:                 /usr/bin/perl
>> configure:20191: result:
>> configure:20193: result:  --------------- Extensions ---------------
>> configure:20196: result:   PostGIS Raster:       enabled
>> configure:20204: result:   PostGIS Topology:     enabled
>> configure:20211: result:   SFCGAL support:       enabled
>> configure:20219: result:   Address Standardizer support:       enabled
>> configure:20225: result:
>> configure:20227: result:  -------- Documentation Generation --------
>> configure:20229: result:   xsltproc:             /projects/xsltproc/xsltproc
>> configure:20231: result:   xsl style sheets:     /projects/docbook/docbook-xsl-1.76.1
>> configure:20233: result:   dblatex:
>> configure:20235: result:   convert:              /c/Windows/System32/convert
>> configure:20237: result:   mathml2.dtd:          http://www.w3.org/Math/DTD/mathml2/mathml2.dtd
>>
>>
>>
>> Do you get an output anything like this or does it just end after that terminated?
>>
>> Thanks,
>> Regina
>>
>>
>>
>>
>>
>>
>> -----Original Message-----
>> From: postgis-users [mailto:[hidden email]] On
>> Behalf Of Sandeep Gupta
>> Sent: Friday, July 07, 2017 8:36 PM
>> To: PostGIS Users Discussion <[hidden email]>
>> Subject: Re: [postgis-users] compiling from source code
>>
>> Autoconf was missing, so I went ahead install autoconf, automake, and libtool.
>>
>> Tried recompiling.
>>
>> sh autogen.sh outputs:
>> * Running /home/linuxbrew/.linuxbrew/bin/glibtoolize (2.4.6)
>>    OPTIONS = --force --copy --install
>> glibtoolize: putting auxiliary files in '.'.
>> glibtoolize: copying file './config.guess'
>> glibtoolize: copying file './config.sub'
>> glibtoolize: copying file './install-sh'
>> glibtoolize: copying file './ltmain.sh'
>> glibtoolize: putting macros in AC_CONFIG_MACRO_DIRS, 'macros'.
>> glibtoolize: copying file 'macros/libtool.m4'
>> glibtoolize: copying file 'macros/ltoptions.m4'
>> glibtoolize: copying file 'macros/ltsugar.m4'
>> glibtoolize: copying file 'macros/ltversion.m4'
>> glibtoolize: copying file 'macros/lt~obsolete.m4'
>> glibtoolize: Consider adding '-I macros' to ACLOCAL_AMFLAGS in Makefile.am.
>> * Running /home/linuxbrew/.linuxbrew/bin/aclocal (1.15.1)
>> * Running /home/linuxbrew/.linuxbrew/bin/autoconf (2.69)
>> ======================================
>> Now you are ready to run './configure'
>> ======================================
>>
>> This does not solve though. When I run ./configure same error appears with -V flag being the issue.
>>
>> -sandeep
>>
>>
>>
>>
>>
>>
>>
>> On Fri, Jul 7, 2017 at 6:33 PM, Regina Obe <[hidden email]> wrote:
>>> Okay I just got an irc note from Even Roualt.  He is running Ubuntu
>>> 16.04 and gcc 5.4  and had no issue running
>>>
>>> sh autogen.sh
>>> ./configure
>>>
>>> So doesn't seem like it's a newer gcc issue unless if its 5.3 specific.
>>>
>>> I'm suspecting something with brew,  MacOS, or tool chain like autoconf.
>>>
>>> What does:
>>>
>>> autoconf --version
>>>
>>> Return?
>>>
>>> I get
>>>
>>> autoconf (GNU Autoconf) 2.69
>>> Copyright (C) 2012 Free Software Foundation, Inc.
>>> License GPLv3+/Autoconf: GNU GPL version 3 or later
>>>
>>> Thanks,
>>> Regina
>>>
>>> -----Original Message-----
>>> From: postgis-users [mailto:[hidden email]] On
>>> Behalf Of Sandeep Gupta
>>> Sent: Friday, July 07, 2017 6:18 PM
>>> To: PostGIS Users Discussion <[hidden email]>
>>> Subject: Re: [postgis-users] compiling from source code
>>>
>>> Hi Regina,
>>>
>>>  Here is the output for gcc -v (install gcc from linuxbrew, which port of brew package manager of macOS):
>>>
>>> Reading specs from
>>> /home/linuxbrew/.linuxbrew/Cellar/gcc/5.3.0/lib/gcc/x86_64-unknown-li
>>> n
>>> ux-gnu/5.3.0/specs
>>> COLLECT_GCC=gcc
>>> COLLECT_LTO_WRAPPER=/home/linuxbrew/.linuxbrew/Cellar/gcc/5.3.0/libex
>>> e c/gcc/x86_64-unknown-linux-gnu/5.3.0/lto-wrapper
>>> Target: x86_64-unknown-linux-gnu
>>> Configured with: ../configure
>>> --prefix=/home/linuxbrew/.linuxbrew/Cellar/gcc/5.3.0
>>> --enable-languages=c,c++,objc,obj-c++,fortran --program-suffix=-5
>>> --with-gmp=/home/linuxbrew/.linuxbrew/opt/gmp
>>> --with-mpfr=/home/linuxbrew/.linuxbrew/opt/mpfr
>>> --with-mpc=/home/linuxbrew/.linuxbrew/opt/libmpc
>>> --with-isl=/home/linuxbrew/.linuxbrew/opt/isl --with-system-zlib --enable-libstdcxx-time=yes --enable-stage1-checking --enable-checking=release --enable-lto --with-build-config=bootstrap-debug --disable-werror --with-pkgversion='Homebrew gcc 5.3.0'
>>> --with-bugurl=https://github.com/Homebrew/homebrew/issues
>>> --enable-plugin --disable-nls --disable-multilib Thread model: posix
>>> gcc version 5.3.0 (Homebrew gcc 5.3.0)
>>>
>>>
>>> Thanks.
>>> sandeep
>>>
>>>
>>>
>>> On Fri, Jul 7, 2017 at 5:52 PM, Regina Obe <[hidden email]> wrote:
>>>> Steve and Sandeep,
>>>>
>>>> Can you try gcc -v instead and let me know what that outputs?
>>>>
>>>> I just checked our Debian PostGIS bot, and she's running gcc 5.2.1  and think she's running the newest of any of our bots . So I can 't rule out a newer gcc at fault here.
>>>> However if I do gcc -V, I get an error on her too, so that's not the issue here:
>>>> --
>>>>
>>>> gcc: error: unrecognized command line option  ?~-V ?T
>>>> gcc: fatal error: no input files
>>>> compilation terminated.
>>>>
>>>> However, lower case -v  (which is what I think configure uses, works just fine).
>>>>
>>>> gcc -v
>>>>
>>>> outputs:
>>>> Using built-in specs.
>>>> COLLECT_GCC=gcc
>>>> COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-linux-gnu/5/lto-wrapper
>>>> Target: x86_64-linux-gnu
>>>> Configured with: ../src/configure -v --with-pkgversion='Debian
>>>> 5.2.1-22' --with-bugurl=file:///usr/share/doc/gcc-5/README.Bugs
>>>> --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++
>>>> --prefix=/usr --program-suffix=-5 --enable-shared --ena
>>>> jar-dir=/usr/lib/jvm-exports/java-1.5.0-gcj-5-amd64
>>>> --with-arch-directory=amd64
>>>> --with-ecj-jar=/usr/share/java/eclipse-ecj.jar --enable-objc-gc
>>>> --enable-multiarch --with-arch-32=i586 --with-abi=m64
>>>> --with-multilib-list=m32,m64,mx32 --enable-m Thread model: posix gcc
>>>> version 5.2.1 20151010 (Debian 5.2.1-22)
>>>>
>>>>
>>>> I'm not sure where Sandeep's   gcc -V is coming from in configure, cause it looks like gcc -v works fine on his system too, but then somewhere down the line switches to upper case -V which is not a valid switch command even in lower gcc versions.
>>>>
>>>>
>>>>
>>>>
>>>> Thanks,
>>>> Regina
>>>>
>>>> -----
>>>> From: Stephen Woodbridge Date: Fri, Jul 7, 2017 at 2:09 PM
>>>>
>>>>
>>>>
>>>> I get the same error running on Ubuntu 16.04 with:
>>>>
>>>> $ gcc -V
>>>> gcc: error: unrecognized command line option  -V
>>>> gcc: fatal error: no input files
>>>> compilation terminated.
>>>>
>>>> Looks like the option should be --version $ gcc --version gcc
>>>> (Ubuntu
>>>> 5.4.0-6ubuntu1~16.04.4) 5.4.0 20160609 Copyright (C) 2015 Free
>>>> Software Foundation, Inc.
>>>> This is free software; see the source for copying conditions.  There
>>>> is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
>>>>
>>>> -Steve
>>>>
>>>> On 7/7/2017 1:51 PM, Sandeep Gupta wrote:
>>>> Hi,
>>>>
>>>> I am using gcc version 5.3 to compile postgis on Fedora.
>>>> The compile  fails at the configure step.
>>>>
>>>> I get the error:
>>>>
>>>> configure: error: C preprocessor "gcc" fails sanity check See
>>>> `config.log' for more details
>>>>
>>>> The relevant line in config.log:
>>>> configure:3031: gcc -v >&5
>>>> Reading specs from
>>>> /home/linuxbrew/.linuxbrew/Cellar/gcc/5.3.0/lib/gcc/x86_64-unknown-l
>>>> i
>>>> n
>>>> ux-gnu/5.3.0/specs
>>>> COLLECT_GCC=gcc
>>>> COLLECT_LTO_WRAPPER=/home/linuxbrew/.linuxbrew/Cellar/gcc/5.3.0/libe
>>>> x e c/gcc/x86_64-unknown-linux-gnu/5.3.0/lto-wrapper
>>>> Target: x86_64-unknown-linux-gnu
>>>> Configured with: ../configure
>>>> --prefix=/home/linuxbrew/.linuxbrew/Cellar/gcc/5.3.0
>>>> --enable-languages=c,c++,objc,obj-c++,fortran --program-suffix=-5
>>>> --with-gmp=/home/linuxbrew/.linuxbrew/opt/gmp
>>>> --with-mpfr=/home/linuxbrew/.linuxbrew/opt/mpfr
>>>> --with-mpc=/home/linuxbrew/.linuxbrew/opt/libmpc
>>>> --with-isl=/home/linuxbrew/.linuxbrew/opt/isl --with-system-zlib
>>>> --enable-libstdcxx-time=yes --enable-stage1-checking
>>>> --enable-checking=release --enable-lto
>>>> --with-build-config=bootstrap-debug --disable-werror
>>>> --with-pkgversion='Homebrew gcc 5.3.0'
>>>> --with-bugurl=https://github.com/Homebrew/homebrew/issues
>>>> --enable-plugin --disable-nls --disable-multilib Thread model: posix
>>>> gcc version 5.3.0 (Homebrew gcc 5.3.0)
>>>> configure:3042: $? = 0
>>>> configure:3031: gcc -V >&5
>>>> gcc: error: unrecognized command line option '-V'
>>>> gcc: fatal error: no input files
>>>> compilation terminated.
>>>>
>>>>
>>>>
>>>> It seems gcc does not like "-V" option. I this a issue to with later
>>>> gcc versions?
>>>>
>>>> Thanks.
>>>> sandeep
>>>> _______________________________________________
>>>> postgis-users mailing list
>>>> [hidden email]
>>>> https://lists.osgeo.org/mailman/listinfo/postgis-users
>>>>
>>>>
>>>> ---
>>>> This email has been checked for viruses by Avast antivirus software.
>>>> https://www.avast.com/antivirus
>>>>
>>>> _______________________________________________
>>>> postgis-users mailing list
>>>> [hidden email]
>>>> https://lists.osgeo.org/mailman/listinfo/postgis-users
>>>>
>>>>
>>>> _______________________________________________
>>>> postgis-users mailing list
>>>> [hidden email]
>>>> https://lists.osgeo.org/mailman/listinfo/postgis-users
>>> _______________________________________________
>>> postgis-users mailing list
>>> [hidden email]
>>> https://lists.osgeo.org/mailman/listinfo/postgis-users
>>>
>>> _______________________________________________
>>> postgis-users mailing list
>>> [hidden email]
>>> https://lists.osgeo.org/mailman/listinfo/postgis-users
>> _______________________________________________
>> postgis-users mailing list
>> [hidden email]
>> https://lists.osgeo.org/mailman/listinfo/postgis-users
>>
>> _______________________________________________
>> postgis-users mailing list
>> [hidden email]
>> https://lists.osgeo.org/mailman/listinfo/postgis-users
> _______________________________________________
> postgis-users mailing list
> [hidden email]
> https://lists.osgeo.org/mailman/listinfo/postgis-users
>
> _______________________________________________
> postgis-users mailing list
> [hidden email]
> https://lists.osgeo.org/mailman/listinfo/postgis-users
_______________________________________________
postgis-users mailing list
[hidden email]
https://lists.osgeo.org/mailman/listinfo/postgis-users
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: compiling from source code

Regina Obe-2
Perhaps you had set it as part of what the answer described here when experimenting

https://stackoverflow.com/questions/23338713/homebrew-how-to-permanently-override-homebrew-cc-homebrew-cxx-env-settings

I assume you just need to reset the HOMEBREW_CC HOMEBREW_CX to nothing or what it was before.


-----Original Message-----
From: postgis-users [mailto:[hidden email]] On Behalf Of Sandeep Gupta
Sent: Monday, July 10, 2017 3:38 PM
To: PostGIS Users Discussion <[hidden email]>
Subject: Re: [postgis-users] compiling from source code

It turned out the problem wasl related to compiling conftest.c:

configure:6858: gcc  conftest.c
conftest.c:14:8: error: unknown type name 'Syntax'
        Syntax error
        ^
conftest.c:14:8: error: expected '=', ',', ';', 'asm' or '__attribute__' at end of input
configure:6858: $? = 1
configure: failed program was:
| /* confdefs.h */
| #define PACKAGE_NAME ""
| #define PACKAGE_TARNAME ""
| #define PACKAGE_VERSION ""
| #define PACKAGE_STRING ""
| #define PACKAGE_BUGREPORT ""
| #define PACKAGE_URL ""
| /* end confdefs.h.  */
| #ifdef __STDC__
| # include <limits.h>
| #else
| # include <assert.h>
| #endif
|                    Syntax error
configure:6858: gcc  conftest.c
conftest.c:14:8: error: unknown type name 'Syntax'
        Syntax error
        ^
conftest.c:14:8: error: expected '=', ',', ';', 'asm' or '__attribute__' at end of input
configure:6858: $? = 1


It is related to the problem posted here:
https://stackoverflow.com/questions/15041937/configure-error-c-preprocessor-fails-sanity-check'

Passing -E option as follows fixes the problem ( i am not sure why):
./configure --prefix=/home/linuxbrew/.linuxbrew/Cellar/postgis/2.3.3
CC=/home/linuxbrew/.linuxbrew/bin/gcc
CXX=/home/linuxbrew/.linuxbrew/bin/g++
CPP='/home/linuxbrew/.linuxbrew/bin/g++ -E


However the compile fails here (this is for postgis 2.3.3):

make[1]: Entering directory
'/home/sandeep/.cache/Homebrew/postgis-2.3.3/postgis'
gcc-4.8 -I../liblwgeom  -fpic -I../libpgcommon -I/home/linuxbrew/.linuxbrew/Cellar/geos/3.6.1/include
-I/home/linuxbrew/.linuxbrew/Cellar/libxml2/2.9.4_3/include/libxml2
-I/home/linuxbrew/.linuxbrew/Cellar/sfcgal/1.3.1/include -DHAVE_SFCGAL
   -fPIC -I/home/linuxbrew/.linuxbrew/Cellar/sfcgal/1.3.1/include
-DHAVE_SFCGAL -I. -I./
-I/home/linuxbrew/.linuxbrew/Cellar/postgresql/9.6.3/include/server
-I/home/linuxbrew/.linuxbrew/Cellar/postgresql/9.6.3/include/internal
-I/home/linuxbrew/.linuxbrew/opt/openssl/include
-I/home/linuxbrew/.linuxbrew/opt/readline/include -D_GNU_SOURCE
-I/home/linuxbrew/.linuxbrew/Cellar/libxml2/2.9.4_2/include/libxml2
-c -o postgis_module.o postgis_module.c
make[1]: gcc-4.8: Command not found
<builtin>: recipe for target 'postgis_module.o' failed
make[1]: *** [postgis_module.o] Error 127


I am not sure why the make is picking up gcc-4.8.

Thanks
sandeep



On Mon, Jul 10, 2017 at 2:42 PM, Regina Obe <[hidden email]> wrote:

> Sandeep,
>
> Sounds like you might be having the same issue described here:
>
> https://stackoverflow.com/questions/23338713/homebrew-how-to-permanent
> ly-override-homebrew-cc-homebrew-cxx-env-settings
>
> Does the suggested answer work.
>
> Thanks,
> Regina
>
> -----Original Message-----
> From: postgis-users [mailto:[hidden email]] On
> Behalf Of Sandeep Gupta
> Sent: Monday, July 10, 2017 2:12 PM
> To: PostGIS Users Discussion <[hidden email]>
> Subject: Re: [postgis-users] compiling from source code
>
> Hi Regina,
>
>  I tried several version of postgis (2.3.3, 2.4.0dev, 2.1.8). I have pkg_config installed on my system.
>
>  The error I get is:
> checking how to run the C preprocessor... gcc
> configure: error: in `/home/sandeep/.cache/Homebrew/postgis-2.3.3':
> configure: error: C preprocessor "gcc" fails sanity check
>
> The configure doesn't proceed after this in my case.
>
> Is there any temporary workaround that you suggest I can try?
>
> Thanks.
> sandeep
>
>
> On Sat, Jul 8, 2017 at 7:40 PM, Regina Obe <[hidden email]> wrote:
>> Sandeep,
>>
>> Which version of PostGIS are you trying to build?  Your configure might be ending for another reason.  For example in PostGIS 2.4, I think we now have a dependency on pkg-config which older versions of PostGIS do not.  We'll sort this out before PostGIS release, but I think downside at moment, is the it fails if pkg-config is not installed.  I forget the exact error you get.
>>
>> I looked around on net for the -V and from what I can tell, that error is harmless and is just part of the process of configure checking the capabilities of the gcc compile.
>> I checked my own config.log and see the same error
>>
>> configure:2948: x86_64-w64-mingw32-gcc -V >&5
>> x86_64-w64-mingw32-gcc.exe: error: unrecognized command line option '-V'
>> x86_64-w64-mingw32-gcc.exe: fatal error: no input files compilation
>> terminated.
>>
>> But my configure continues, works fine and in the end shows this:
>>
>> configure:20134: result:
>> configure:20136: result:   PostGIS is now configured for x86_64-w64-mingw32
>> configure:20138: result:
>> configure:20140: result:  -------------- Compiler Info -------------
>> configure:20142: result:   C compiler:           x86_64-w64-mingw32-gcc -g -O2
>> configure:20144: result:   SQL preprocessor:     /mingw64/bin/cpp -traditional-cpp -w -P
>> configure:20146: result:
>> configure:20148: result:  -------------- Dependencies --------------
>> configure:20150: result:   GEOS config:          /projects/geos/rel-3.7.0devw64gcc48/bin/geos-config
>> configure:20152: result:   GEOS version:         3.7.0dev
>> configure:20155: result:   GDAL config:          /projects/gdal/rel-2.2.1w64gcc48/bin/gdal-config
>> configure:20157: result:   GDAL version:         2.2.1
>> configure:20161: result:   SFCGAL config:        /projects/CGAL/rel-sfcgal-1.3.0w64gcc48/bin/sfcgal-config
>> configure:20163: result:   SFCGAL version:       1.3.0
>> configure:20167: result:   PostgreSQL config:    /projects/postgresql/rel/pg9.4w64gcc48/bin/pg_config
>> configure:20169: result:   PostgreSQL version:   PostgreSQL 9.4.5
>> configure:20175: result:   PROJ4 version:        49
>> configure:20177: result:   Libxml2 config:       /projects/libxml/rel-libxml2-2.7.8w64gcc48/bin/xml2-config
>> configure:20179: result:   Libxml2 version:      2.7.8
>> configure:20181: result:   JSON-C support:       yes
>> configure:20183: result:   protobuf-c support:   yes
>> configure:20185: result:   PCRE support:         yes
>> configure:20187: result:   PostGIS debug level:  0
>> configure:20189: result:   Perl:                 /usr/bin/perl
>> configure:20191: result:
>> configure:20193: result:  --------------- Extensions ---------------
>> configure:20196: result:   PostGIS Raster:       enabled
>> configure:20204: result:   PostGIS Topology:     enabled
>> configure:20211: result:   SFCGAL support:       enabled
>> configure:20219: result:   Address Standardizer support:       enabled
>> configure:20225: result:
>> configure:20227: result:  -------- Documentation Generation --------
>> configure:20229: result:   xsltproc:             /projects/xsltproc/xsltproc
>> configure:20231: result:   xsl style sheets:     /projects/docbook/docbook-xsl-1.76.1
>> configure:20233: result:   dblatex:
>> configure:20235: result:   convert:              /c/Windows/System32/convert
>> configure:20237: result:   mathml2.dtd:          http://www.w3.org/Math/DTD/mathml2/mathml2.dtd
>>
>>
>>
>> Do you get an output anything like this or does it just end after that terminated?
>>
>> Thanks,
>> Regina
>>
>>
>>
>>
>>
>>
>> -----Original Message-----
>> From: postgis-users [mailto:[hidden email]] On
>> Behalf Of Sandeep Gupta
>> Sent: Friday, July 07, 2017 8:36 PM
>> To: PostGIS Users Discussion <[hidden email]>
>> Subject: Re: [postgis-users] compiling from source code
>>
>> Autoconf was missing, so I went ahead install autoconf, automake, and libtool.
>>
>> Tried recompiling.
>>
>> sh autogen.sh outputs:
>> * Running /home/linuxbrew/.linuxbrew/bin/glibtoolize (2.4.6)
>>    OPTIONS = --force --copy --install
>> glibtoolize: putting auxiliary files in '.'.
>> glibtoolize: copying file './config.guess'
>> glibtoolize: copying file './config.sub'
>> glibtoolize: copying file './install-sh'
>> glibtoolize: copying file './ltmain.sh'
>> glibtoolize: putting macros in AC_CONFIG_MACRO_DIRS, 'macros'.
>> glibtoolize: copying file 'macros/libtool.m4'
>> glibtoolize: copying file 'macros/ltoptions.m4'
>> glibtoolize: copying file 'macros/ltsugar.m4'
>> glibtoolize: copying file 'macros/ltversion.m4'
>> glibtoolize: copying file 'macros/lt~obsolete.m4'
>> glibtoolize: Consider adding '-I macros' to ACLOCAL_AMFLAGS in Makefile.am.
>> * Running /home/linuxbrew/.linuxbrew/bin/aclocal (1.15.1)
>> * Running /home/linuxbrew/.linuxbrew/bin/autoconf (2.69)
>> ======================================
>> Now you are ready to run './configure'
>> ======================================
>>
>> This does not solve though. When I run ./configure same error appears with -V flag being the issue.
>>
>> -sandeep
>>
>>
>>
>>
>>
>>
>>
>> On Fri, Jul 7, 2017 at 6:33 PM, Regina Obe <[hidden email]> wrote:
>>> Okay I just got an irc note from Even Roualt.  He is running Ubuntu
>>> 16.04 and gcc 5.4  and had no issue running
>>>
>>> sh autogen.sh
>>> ./configure
>>>
>>> So doesn't seem like it's a newer gcc issue unless if its 5.3 specific.
>>>
>>> I'm suspecting something with brew,  MacOS, or tool chain like autoconf.
>>>
>>> What does:
>>>
>>> autoconf --version
>>>
>>> Return?
>>>
>>> I get
>>>
>>> autoconf (GNU Autoconf) 2.69
>>> Copyright (C) 2012 Free Software Foundation, Inc.
>>> License GPLv3+/Autoconf: GNU GPL version 3 or later
>>>
>>> Thanks,
>>> Regina
>>>
>>> -----Original Message-----
>>> From: postgis-users [mailto:[hidden email]]
>>> On Behalf Of Sandeep Gupta
>>> Sent: Friday, July 07, 2017 6:18 PM
>>> To: PostGIS Users Discussion <[hidden email]>
>>> Subject: Re: [postgis-users] compiling from source code
>>>
>>> Hi Regina,
>>>
>>>  Here is the output for gcc -v (install gcc from linuxbrew, which port of brew package manager of macOS):
>>>
>>> Reading specs from
>>> /home/linuxbrew/.linuxbrew/Cellar/gcc/5.3.0/lib/gcc/x86_64-unknown-l
>>> i
>>> n
>>> ux-gnu/5.3.0/specs
>>> COLLECT_GCC=gcc
>>> COLLECT_LTO_WRAPPER=/home/linuxbrew/.linuxbrew/Cellar/gcc/5.3.0/libe
>>> x e c/gcc/x86_64-unknown-linux-gnu/5.3.0/lto-wrapper
>>> Target: x86_64-unknown-linux-gnu
>>> Configured with: ../configure
>>> --prefix=/home/linuxbrew/.linuxbrew/Cellar/gcc/5.3.0
>>> --enable-languages=c,c++,objc,obj-c++,fortran --program-suffix=-5
>>> --with-gmp=/home/linuxbrew/.linuxbrew/opt/gmp
>>> --with-mpfr=/home/linuxbrew/.linuxbrew/opt/mpfr
>>> --with-mpc=/home/linuxbrew/.linuxbrew/opt/libmpc
>>> --with-isl=/home/linuxbrew/.linuxbrew/opt/isl --with-system-zlib --enable-libstdcxx-time=yes --enable-stage1-checking --enable-checking=release --enable-lto --with-build-config=bootstrap-debug --disable-werror --with-pkgversion='Homebrew gcc 5.3.0'
>>> --with-bugurl=https://github.com/Homebrew/homebrew/issues
>>> --enable-plugin --disable-nls --disable-multilib Thread model: posix
>>> gcc version 5.3.0 (Homebrew gcc 5.3.0)
>>>
>>>
>>> Thanks.
>>> sandeep
>>>
>>>
>>>
>>> On Fri, Jul 7, 2017 at 5:52 PM, Regina Obe <[hidden email]> wrote:
>>>> Steve and Sandeep,
>>>>
>>>> Can you try gcc -v instead and let me know what that outputs?
>>>>
>>>> I just checked our Debian PostGIS bot, and she's running gcc 5.2.1  and think she's running the newest of any of our bots . So I can 't rule out a newer gcc at fault here.
>>>> However if I do gcc -V, I get an error on her too, so that's not the issue here:
>>>> --
>>>>
>>>> gcc: error: unrecognized command line option  ?~-V ?T
>>>> gcc: fatal error: no input files
>>>> compilation terminated.
>>>>
>>>> However, lower case -v  (which is what I think configure uses, works just fine).
>>>>
>>>> gcc -v
>>>>
>>>> outputs:
>>>> Using built-in specs.
>>>> COLLECT_GCC=gcc
>>>> COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-linux-gnu/5/lto-wrapper
>>>> Target: x86_64-linux-gnu
>>>> Configured with: ../src/configure -v --with-pkgversion='Debian
>>>> 5.2.1-22' --with-bugurl=file:///usr/share/doc/gcc-5/README.Bugs
>>>> --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++
>>>> --prefix=/usr --program-suffix=-5 --enable-shared --ena
>>>> jar-dir=/usr/lib/jvm-exports/java-1.5.0-gcj-5-amd64
>>>> --with-arch-directory=amd64
>>>> --with-ecj-jar=/usr/share/java/eclipse-ecj.jar --enable-objc-gc
>>>> --enable-multiarch --with-arch-32=i586 --with-abi=m64
>>>> --with-multilib-list=m32,m64,mx32 --enable-m Thread model: posix
>>>> gcc version 5.2.1 20151010 (Debian 5.2.1-22)
>>>>
>>>>
>>>> I'm not sure where Sandeep's   gcc -V is coming from in configure, cause it looks like gcc -v works fine on his system too, but then somewhere down the line switches to upper case -V which is not a valid switch command even in lower gcc versions.
>>>>
>>>>
>>>>
>>>>
>>>> Thanks,
>>>> Regina
>>>>
>>>> -----
>>>> From: Stephen Woodbridge Date: Fri, Jul 7, 2017 at 2:09 PM
>>>>
>>>>
>>>>
>>>> I get the same error running on Ubuntu 16.04 with:
>>>>
>>>> $ gcc -V
>>>> gcc: error: unrecognized command line option  -V
>>>> gcc: fatal error: no input files
>>>> compilation terminated.
>>>>
>>>> Looks like the option should be --version $ gcc --version gcc
>>>> (Ubuntu
>>>> 5.4.0-6ubuntu1~16.04.4) 5.4.0 20160609 Copyright (C) 2015 Free
>>>> Software Foundation, Inc.
>>>> This is free software; see the source for copying conditions.  
>>>> There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
>>>>
>>>> -Steve
>>>>
>>>> On 7/7/2017 1:51 PM, Sandeep Gupta wrote:
>>>> Hi,
>>>>
>>>> I am using gcc version 5.3 to compile postgis on Fedora.
>>>> The compile  fails at the configure step.
>>>>
>>>> I get the error:
>>>>
>>>> configure: error: C preprocessor "gcc" fails sanity check See
>>>> `config.log' for more details
>>>>
>>>> The relevant line in config.log:
>>>> configure:3031: gcc -v >&5
>>>> Reading specs from
>>>> /home/linuxbrew/.linuxbrew/Cellar/gcc/5.3.0/lib/gcc/x86_64-unknown-
>>>> l
>>>> i
>>>> n
>>>> ux-gnu/5.3.0/specs
>>>> COLLECT_GCC=gcc
>>>> COLLECT_LTO_WRAPPER=/home/linuxbrew/.linuxbrew/Cellar/gcc/5.3.0/lib
>>>> e x e c/gcc/x86_64-unknown-linux-gnu/5.3.0/lto-wrapper
>>>> Target: x86_64-unknown-linux-gnu
>>>> Configured with: ../configure
>>>> --prefix=/home/linuxbrew/.linuxbrew/Cellar/gcc/5.3.0
>>>> --enable-languages=c,c++,objc,obj-c++,fortran --program-suffix=-5
>>>> --with-gmp=/home/linuxbrew/.linuxbrew/opt/gmp
>>>> --with-mpfr=/home/linuxbrew/.linuxbrew/opt/mpfr
>>>> --with-mpc=/home/linuxbrew/.linuxbrew/opt/libmpc
>>>> --with-isl=/home/linuxbrew/.linuxbrew/opt/isl --with-system-zlib
>>>> --enable-libstdcxx-time=yes --enable-stage1-checking
>>>> --enable-checking=release --enable-lto
>>>> --with-build-config=bootstrap-debug --disable-werror
>>>> --with-pkgversion='Homebrew gcc 5.3.0'
>>>> --with-bugurl=https://github.com/Homebrew/homebrew/issues
>>>> --enable-plugin --disable-nls --disable-multilib Thread model:
>>>> posix gcc version 5.3.0 (Homebrew gcc 5.3.0)
>>>> configure:3042: $? = 0
>>>> configure:3031: gcc -V >&5
>>>> gcc: error: unrecognized command line option '-V'
>>>> gcc: fatal error: no input files
>>>> compilation terminated.
>>>>
>>>>
>>>>
>>>> It seems gcc does not like "-V" option. I this a issue to with
>>>> later gcc versions?
>>>>
>>>> Thanks.
>>>> sandeep
>>>> _______________________________________________
>>>> postgis-users mailing list
>>>> [hidden email]
>>>> https://lists.osgeo.org/mailman/listinfo/postgis-users
>>>>
>>>>
>>>> ---
>>>> This email has been checked for viruses by Avast antivirus software.
>>>> https://www.avast.com/antivirus
>>>>
>>>> _______________________________________________
>>>> postgis-users mailing list
>>>> [hidden email]
>>>> https://lists.osgeo.org/mailman/listinfo/postgis-users
>>>>
>>>>
>>>> _______________________________________________
>>>> postgis-users mailing list
>>>> [hidden email]
>>>> https://lists.osgeo.org/mailman/listinfo/postgis-users
>>> _______________________________________________
>>> postgis-users mailing list
>>> [hidden email]
>>> https://lists.osgeo.org/mailman/listinfo/postgis-users
>>>
>>> _______________________________________________
>>> postgis-users mailing list
>>> [hidden email]
>>> https://lists.osgeo.org/mailman/listinfo/postgis-users
>> _______________________________________________
>> postgis-users mailing list
>> [hidden email]
>> https://lists.osgeo.org/mailman/listinfo/postgis-users
>>
>> _______________________________________________
>> postgis-users mailing list
>> [hidden email]
>> https://lists.osgeo.org/mailman/listinfo/postgis-users
> _______________________________________________
> postgis-users mailing list
> [hidden email]
> https://lists.osgeo.org/mailman/listinfo/postgis-users
>
> _______________________________________________
> postgis-users mailing list
> [hidden email]
> https://lists.osgeo.org/mailman/listinfo/postgis-users
_______________________________________________
postgis-users mailing list
[hidden email]
https://lists.osgeo.org/mailman/listinfo/postgis-users

_______________________________________________
postgis-users mailing list
[hidden email]
https://lists.osgeo.org/mailman/listinfo/postgis-users
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: compiling from source code

Sandeep Gupta
No I didn't used the solution from that post.
I don't see any mention of 4.8 in any files or in the environment variable.

I started afresh and still end up with gcc-4.8 for linking.



On Mon, Jul 10, 2017 at 4:38 PM, Regina Obe <[hidden email]> wrote:

> Perhaps you had set it as part of what the answer described here when experimenting
>
> https://stackoverflow.com/questions/23338713/homebrew-how-to-permanently-override-homebrew-cc-homebrew-cxx-env-settings
>
> I assume you just need to reset the HOMEBREW_CC HOMEBREW_CX to nothing or what it was before.
>
>
> -----Original Message-----
> From: postgis-users [mailto:[hidden email]] On Behalf Of Sandeep Gupta
> Sent: Monday, July 10, 2017 3:38 PM
> To: PostGIS Users Discussion <[hidden email]>
> Subject: Re: [postgis-users] compiling from source code
>
> It turned out the problem wasl related to compiling conftest.c:
>
> configure:6858: gcc  conftest.c
> conftest.c:14:8: error: unknown type name 'Syntax'
>         Syntax error
>         ^
> conftest.c:14:8: error: expected '=', ',', ';', 'asm' or '__attribute__' at end of input
> configure:6858: $? = 1
> configure: failed program was:
> | /* confdefs.h */
> | #define PACKAGE_NAME ""
> | #define PACKAGE_TARNAME ""
> | #define PACKAGE_VERSION ""
> | #define PACKAGE_STRING ""
> | #define PACKAGE_BUGREPORT ""
> | #define PACKAGE_URL ""
> | /* end confdefs.h.  */
> | #ifdef __STDC__
> | # include <limits.h>
> | #else
> | # include <assert.h>
> | #endif
> |                    Syntax error
> configure:6858: gcc  conftest.c
> conftest.c:14:8: error: unknown type name 'Syntax'
>         Syntax error
>         ^
> conftest.c:14:8: error: expected '=', ',', ';', 'asm' or '__attribute__' at end of input
> configure:6858: $? = 1
>
>
> It is related to the problem posted here:
> https://stackoverflow.com/questions/15041937/configure-error-c-preprocessor-fails-sanity-check'
>
> Passing -E option as follows fixes the problem ( i am not sure why):
> ./configure --prefix=/home/linuxbrew/.linuxbrew/Cellar/postgis/2.3.3
> CC=/home/linuxbrew/.linuxbrew/bin/gcc
> CXX=/home/linuxbrew/.linuxbrew/bin/g++
> CPP='/home/linuxbrew/.linuxbrew/bin/g++ -E
>
>
> However the compile fails here (this is for postgis 2.3.3):
>
> make[1]: Entering directory
> '/home/sandeep/.cache/Homebrew/postgis-2.3.3/postgis'
> gcc-4.8 -I../liblwgeom  -fpic -I../libpgcommon -I/home/linuxbrew/.linuxbrew/Cellar/geos/3.6.1/include
> -I/home/linuxbrew/.linuxbrew/Cellar/libxml2/2.9.4_3/include/libxml2
> -I/home/linuxbrew/.linuxbrew/Cellar/sfcgal/1.3.1/include -DHAVE_SFCGAL
>    -fPIC -I/home/linuxbrew/.linuxbrew/Cellar/sfcgal/1.3.1/include
> -DHAVE_SFCGAL -I. -I./
> -I/home/linuxbrew/.linuxbrew/Cellar/postgresql/9.6.3/include/server
> -I/home/linuxbrew/.linuxbrew/Cellar/postgresql/9.6.3/include/internal
> -I/home/linuxbrew/.linuxbrew/opt/openssl/include
> -I/home/linuxbrew/.linuxbrew/opt/readline/include -D_GNU_SOURCE
> -I/home/linuxbrew/.linuxbrew/Cellar/libxml2/2.9.4_2/include/libxml2
> -c -o postgis_module.o postgis_module.c
> make[1]: gcc-4.8: Command not found
> <builtin>: recipe for target 'postgis_module.o' failed
> make[1]: *** [postgis_module.o] Error 127
>
>
> I am not sure why the make is picking up gcc-4.8.
>
> Thanks
> sandeep
>
>
>
> On Mon, Jul 10, 2017 at 2:42 PM, Regina Obe <[hidden email]> wrote:
>> Sandeep,
>>
>> Sounds like you might be having the same issue described here:
>>
>> https://stackoverflow.com/questions/23338713/homebrew-how-to-permanent
>> ly-override-homebrew-cc-homebrew-cxx-env-settings
>>
>> Does the suggested answer work.
>>
>> Thanks,
>> Regina
>>
>> -----Original Message-----
>> From: postgis-users [mailto:[hidden email]] On
>> Behalf Of Sandeep Gupta
>> Sent: Monday, July 10, 2017 2:12 PM
>> To: PostGIS Users Discussion <[hidden email]>
>> Subject: Re: [postgis-users] compiling from source code
>>
>> Hi Regina,
>>
>>  I tried several version of postgis (2.3.3, 2.4.0dev, 2.1.8). I have pkg_config installed on my system.
>>
>>  The error I get is:
>> checking how to run the C preprocessor... gcc
>> configure: error: in `/home/sandeep/.cache/Homebrew/postgis-2.3.3':
>> configure: error: C preprocessor "gcc" fails sanity check
>>
>> The configure doesn't proceed after this in my case.
>>
>> Is there any temporary workaround that you suggest I can try?
>>
>> Thanks.
>> sandeep
>>
>>
>> On Sat, Jul 8, 2017 at 7:40 PM, Regina Obe <[hidden email]> wrote:
>>> Sandeep,
>>>
>>> Which version of PostGIS are you trying to build?  Your configure might be ending for another reason.  For example in PostGIS 2.4, I think we now have a dependency on pkg-config which older versions of PostGIS do not.  We'll sort this out before PostGIS release, but I think downside at moment, is the it fails if pkg-config is not installed.  I forget the exact error you get.
>>>
>>> I looked around on net for the -V and from what I can tell, that error is harmless and is just part of the process of configure checking the capabilities of the gcc compile.
>>> I checked my own config.log and see the same error
>>>
>>> configure:2948: x86_64-w64-mingw32-gcc -V >&5
>>> x86_64-w64-mingw32-gcc.exe: error: unrecognized command line option '-V'
>>> x86_64-w64-mingw32-gcc.exe: fatal error: no input files compilation
>>> terminated.
>>>
>>> But my configure continues, works fine and in the end shows this:
>>>
>>> configure:20134: result:
>>> configure:20136: result:   PostGIS is now configured for x86_64-w64-mingw32
>>> configure:20138: result:
>>> configure:20140: result:  -------------- Compiler Info -------------
>>> configure:20142: result:   C compiler:           x86_64-w64-mingw32-gcc -g -O2
>>> configure:20144: result:   SQL preprocessor:     /mingw64/bin/cpp -traditional-cpp -w -P
>>> configure:20146: result:
>>> configure:20148: result:  -------------- Dependencies --------------
>>> configure:20150: result:   GEOS config:          /projects/geos/rel-3.7.0devw64gcc48/bin/geos-config
>>> configure:20152: result:   GEOS version:         3.7.0dev
>>> configure:20155: result:   GDAL config:          /projects/gdal/rel-2.2.1w64gcc48/bin/gdal-config
>>> configure:20157: result:   GDAL version:         2.2.1
>>> configure:20161: result:   SFCGAL config:        /projects/CGAL/rel-sfcgal-1.3.0w64gcc48/bin/sfcgal-config
>>> configure:20163: result:   SFCGAL version:       1.3.0
>>> configure:20167: result:   PostgreSQL config:    /projects/postgresql/rel/pg9.4w64gcc48/bin/pg_config
>>> configure:20169: result:   PostgreSQL version:   PostgreSQL 9.4.5
>>> configure:20175: result:   PROJ4 version:        49
>>> configure:20177: result:   Libxml2 config:       /projects/libxml/rel-libxml2-2.7.8w64gcc48/bin/xml2-config
>>> configure:20179: result:   Libxml2 version:      2.7.8
>>> configure:20181: result:   JSON-C support:       yes
>>> configure:20183: result:   protobuf-c support:   yes
>>> configure:20185: result:   PCRE support:         yes
>>> configure:20187: result:   PostGIS debug level:  0
>>> configure:20189: result:   Perl:                 /usr/bin/perl
>>> configure:20191: result:
>>> configure:20193: result:  --------------- Extensions ---------------
>>> configure:20196: result:   PostGIS Raster:       enabled
>>> configure:20204: result:   PostGIS Topology:     enabled
>>> configure:20211: result:   SFCGAL support:       enabled
>>> configure:20219: result:   Address Standardizer support:       enabled
>>> configure:20225: result:
>>> configure:20227: result:  -------- Documentation Generation --------
>>> configure:20229: result:   xsltproc:             /projects/xsltproc/xsltproc
>>> configure:20231: result:   xsl style sheets:     /projects/docbook/docbook-xsl-1.76.1
>>> configure:20233: result:   dblatex:
>>> configure:20235: result:   convert:              /c/Windows/System32/convert
>>> configure:20237: result:   mathml2.dtd:          http://www.w3.org/Math/DTD/mathml2/mathml2.dtd
>>>
>>>
>>>
>>> Do you get an output anything like this or does it just end after that terminated?
>>>
>>> Thanks,
>>> Regina
>>>
>>>
>>>
>>>
>>>
>>>
>>> -----Original Message-----
>>> From: postgis-users [mailto:[hidden email]] On
>>> Behalf Of Sandeep Gupta
>>> Sent: Friday, July 07, 2017 8:36 PM
>>> To: PostGIS Users Discussion <[hidden email]>
>>> Subject: Re: [postgis-users] compiling from source code
>>>
>>> Autoconf was missing, so I went ahead install autoconf, automake, and libtool.
>>>
>>> Tried recompiling.
>>>
>>> sh autogen.sh outputs:
>>> * Running /home/linuxbrew/.linuxbrew/bin/glibtoolize (2.4.6)
>>>    OPTIONS = --force --copy --install
>>> glibtoolize: putting auxiliary files in '.'.
>>> glibtoolize: copying file './config.guess'
>>> glibtoolize: copying file './config.sub'
>>> glibtoolize: copying file './install-sh'
>>> glibtoolize: copying file './ltmain.sh'
>>> glibtoolize: putting macros in AC_CONFIG_MACRO_DIRS, 'macros'.
>>> glibtoolize: copying file 'macros/libtool.m4'
>>> glibtoolize: copying file 'macros/ltoptions.m4'
>>> glibtoolize: copying file 'macros/ltsugar.m4'
>>> glibtoolize: copying file 'macros/ltversion.m4'
>>> glibtoolize: copying file 'macros/lt~obsolete.m4'
>>> glibtoolize: Consider adding '-I macros' to ACLOCAL_AMFLAGS in Makefile.am.
>>> * Running /home/linuxbrew/.linuxbrew/bin/aclocal (1.15.1)
>>> * Running /home/linuxbrew/.linuxbrew/bin/autoconf (2.69)
>>> ======================================
>>> Now you are ready to run './configure'
>>> ======================================
>>>
>>> This does not solve though. When I run ./configure same error appears with -V flag being the issue.
>>>
>>> -sandeep
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>> On Fri, Jul 7, 2017 at 6:33 PM, Regina Obe <[hidden email]> wrote:
>>>> Okay I just got an irc note from Even Roualt.  He is running Ubuntu
>>>> 16.04 and gcc 5.4  and had no issue running
>>>>
>>>> sh autogen.sh
>>>> ./configure
>>>>
>>>> So doesn't seem like it's a newer gcc issue unless if its 5.3 specific.
>>>>
>>>> I'm suspecting something with brew,  MacOS, or tool chain like autoconf.
>>>>
>>>> What does:
>>>>
>>>> autoconf --version
>>>>
>>>> Return?
>>>>
>>>> I get
>>>>
>>>> autoconf (GNU Autoconf) 2.69
>>>> Copyright (C) 2012 Free Software Foundation, Inc.
>>>> License GPLv3+/Autoconf: GNU GPL version 3 or later
>>>>
>>>> Thanks,
>>>> Regina
>>>>
>>>> -----Original Message-----
>>>> From: postgis-users [mailto:[hidden email]]
>>>> On Behalf Of Sandeep Gupta
>>>> Sent: Friday, July 07, 2017 6:18 PM
>>>> To: PostGIS Users Discussion <[hidden email]>
>>>> Subject: Re: [postgis-users] compiling from source code
>>>>
>>>> Hi Regina,
>>>>
>>>>  Here is the output for gcc -v (install gcc from linuxbrew, which port of brew package manager of macOS):
>>>>
>>>> Reading specs from
>>>> /home/linuxbrew/.linuxbrew/Cellar/gcc/5.3.0/lib/gcc/x86_64-unknown-l
>>>> i
>>>> n
>>>> ux-gnu/5.3.0/specs
>>>> COLLECT_GCC=gcc
>>>> COLLECT_LTO_WRAPPER=/home/linuxbrew/.linuxbrew/Cellar/gcc/5.3.0/libe
>>>> x e c/gcc/x86_64-unknown-linux-gnu/5.3.0/lto-wrapper
>>>> Target: x86_64-unknown-linux-gnu
>>>> Configured with: ../configure
>>>> --prefix=/home/linuxbrew/.linuxbrew/Cellar/gcc/5.3.0
>>>> --enable-languages=c,c++,objc,obj-c++,fortran --program-suffix=-5
>>>> --with-gmp=/home/linuxbrew/.linuxbrew/opt/gmp
>>>> --with-mpfr=/home/linuxbrew/.linuxbrew/opt/mpfr
>>>> --with-mpc=/home/linuxbrew/.linuxbrew/opt/libmpc
>>>> --with-isl=/home/linuxbrew/.linuxbrew/opt/isl --with-system-zlib --enable-libstdcxx-time=yes --enable-stage1-checking --enable-checking=release --enable-lto --with-build-config=bootstrap-debug --disable-werror --with-pkgversion='Homebrew gcc 5.3.0'
>>>> --with-bugurl=https://github.com/Homebrew/homebrew/issues
>>>> --enable-plugin --disable-nls --disable-multilib Thread model: posix
>>>> gcc version 5.3.0 (Homebrew gcc 5.3.0)
>>>>
>>>>
>>>> Thanks.
>>>> sandeep
>>>>
>>>>
>>>>
>>>> On Fri, Jul 7, 2017 at 5:52 PM, Regina Obe <[hidden email]> wrote:
>>>>> Steve and Sandeep,
>>>>>
>>>>> Can you try gcc -v instead and let me know what that outputs?
>>>>>
>>>>> I just checked our Debian PostGIS bot, and she's running gcc 5.2.1  and think she's running the newest of any of our bots . So I can 't rule out a newer gcc at fault here.
>>>>> However if I do gcc -V, I get an error on her too, so that's not the issue here:
>>>>> --
>>>>>
>>>>> gcc: error: unrecognized command line option  ?~-V ?T
>>>>> gcc: fatal error: no input files
>>>>> compilation terminated.
>>>>>
>>>>> However, lower case -v  (which is what I think configure uses, works just fine).
>>>>>
>>>>> gcc -v
>>>>>
>>>>> outputs:
>>>>> Using built-in specs.
>>>>> COLLECT_GCC=gcc
>>>>> COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-linux-gnu/5/lto-wrapper
>>>>> Target: x86_64-linux-gnu
>>>>> Configured with: ../src/configure -v --with-pkgversion='Debian
>>>>> 5.2.1-22' --with-bugurl=file:///usr/share/doc/gcc-5/README.Bugs
>>>>> --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++
>>>>> --prefix=/usr --program-suffix=-5 --enable-shared --ena
>>>>> jar-dir=/usr/lib/jvm-exports/java-1.5.0-gcj-5-amd64
>>>>> --with-arch-directory=amd64
>>>>> --with-ecj-jar=/usr/share/java/eclipse-ecj.jar --enable-objc-gc
>>>>> --enable-multiarch --with-arch-32=i586 --with-abi=m64
>>>>> --with-multilib-list=m32,m64,mx32 --enable-m Thread model: posix
>>>>> gcc version 5.2.1 20151010 (Debian 5.2.1-22)
>>>>>
>>>>>
>>>>> I'm not sure where Sandeep's   gcc -V is coming from in configure, cause it looks like gcc -v works fine on his system too, but then somewhere down the line switches to upper case -V which is not a valid switch command even in lower gcc versions.
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> Thanks,
>>>>> Regina
>>>>>
>>>>> -----
>>>>> From: Stephen Woodbridge Date: Fri, Jul 7, 2017 at 2:09 PM
>>>>>
>>>>>
>>>>>
>>>>> I get the same error running on Ubuntu 16.04 with:
>>>>>
>>>>> $ gcc -V
>>>>> gcc: error: unrecognized command line option  -V
>>>>> gcc: fatal error: no input files
>>>>> compilation terminated.
>>>>>
>>>>> Looks like the option should be --version $ gcc --version gcc
>>>>> (Ubuntu
>>>>> 5.4.0-6ubuntu1~16.04.4) 5.4.0 20160609 Copyright (C) 2015 Free
>>>>> Software Foundation, Inc.
>>>>> This is free software; see the source for copying conditions.
>>>>> There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
>>>>>
>>>>> -Steve
>>>>>
>>>>> On 7/7/2017 1:51 PM, Sandeep Gupta wrote:
>>>>> Hi,
>>>>>
>>>>> I am using gcc version 5.3 to compile postgis on Fedora.
>>>>> The compile  fails at the configure step.
>>>>>
>>>>> I get the error:
>>>>>
>>>>> configure: error: C preprocessor "gcc" fails sanity check See
>>>>> `config.log' for more details
>>>>>
>>>>> The relevant line in config.log:
>>>>> configure:3031: gcc -v >&5
>>>>> Reading specs from
>>>>> /home/linuxbrew/.linuxbrew/Cellar/gcc/5.3.0/lib/gcc/x86_64-unknown-
>>>>> l
>>>>> i
>>>>> n
>>>>> ux-gnu/5.3.0/specs
>>>>> COLLECT_GCC=gcc
>>>>> COLLECT_LTO_WRAPPER=/home/linuxbrew/.linuxbrew/Cellar/gcc/5.3.0/lib
>>>>> e x e c/gcc/x86_64-unknown-linux-gnu/5.3.0/lto-wrapper
>>>>> Target: x86_64-unknown-linux-gnu
>>>>> Configured with: ../configure
>>>>> --prefix=/home/linuxbrew/.linuxbrew/Cellar/gcc/5.3.0
>>>>> --enable-languages=c,c++,objc,obj-c++,fortran --program-suffix=-5
>>>>> --with-gmp=/home/linuxbrew/.linuxbrew/opt/gmp
>>>>> --with-mpfr=/home/linuxbrew/.linuxbrew/opt/mpfr
>>>>> --with-mpc=/home/linuxbrew/.linuxbrew/opt/libmpc
>>>>> --with-isl=/home/linuxbrew/.linuxbrew/opt/isl --with-system-zlib
>>>>> --enable-libstdcxx-time=yes --enable-stage1-checking
>>>>> --enable-checking=release --enable-lto
>>>>> --with-build-config=bootstrap-debug --disable-werror
>>>>> --with-pkgversion='Homebrew gcc 5.3.0'
>>>>> --with-bugurl=https://github.com/Homebrew/homebrew/issues
>>>>> --enable-plugin --disable-nls --disable-multilib Thread model:
>>>>> posix gcc version 5.3.0 (Homebrew gcc 5.3.0)
>>>>> configure:3042: $? = 0
>>>>> configure:3031: gcc -V >&5
>>>>> gcc: error: unrecognized command line option '-V'
>>>>> gcc: fatal error: no input files
>>>>> compilation terminated.
>>>>>
>>>>>
>>>>>
>>>>> It seems gcc does not like "-V" option. I this a issue to with
>>>>> later gcc versions?
>>>>>
>>>>> Thanks.
>>>>> sandeep
>>>>> _______________________________________________
>>>>> postgis-users mailing list
>>>>> [hidden email]
>>>>> https://lists.osgeo.org/mailman/listinfo/postgis-users
>>>>>
>>>>>
>>>>> ---
>>>>> This email has been checked for viruses by Avast antivirus software.
>>>>> https://www.avast.com/antivirus
>>>>>
>>>>> _______________________________________________
>>>>> postgis-users mailing list
>>>>> [hidden email]
>>>>> https://lists.osgeo.org/mailman/listinfo/postgis-users
>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> postgis-users mailing list
>>>>> [hidden email]
>>>>> https://lists.osgeo.org/mailman/listinfo/postgis-users
>>>> _______________________________________________
>>>> postgis-users mailing list
>>>> [hidden email]
>>>> https://lists.osgeo.org/mailman/listinfo/postgis-users
>>>>
>>>> _______________________________________________
>>>> postgis-users mailing list
>>>> [hidden email]
>>>> https://lists.osgeo.org/mailman/listinfo/postgis-users
>>> _______________________________________________
>>> postgis-users mailing list
>>> [hidden email]
>>> https://lists.osgeo.org/mailman/listinfo/postgis-users
>>>
>>> _______________________________________________
>>> postgis-users mailing list
>>> [hidden email]
>>> https://lists.osgeo.org/mailman/listinfo/postgis-users
>> _______________________________________________
>> postgis-users mailing list
>> [hidden email]
>> https://lists.osgeo.org/mailman/listinfo/postgis-users
>>
>> _______________________________________________
>> postgis-users mailing list
>> [hidden email]
>> https://lists.osgeo.org/mailman/listinfo/postgis-users
> _______________________________________________
> postgis-users mailing list
> [hidden email]
> https://lists.osgeo.org/mailman/listinfo/postgis-users
>
> _______________________________________________
> postgis-users mailing list
> [hidden email]
> https://lists.osgeo.org/mailman/listinfo/postgis-users
_______________________________________________
postgis-users mailing list
[hidden email]
https://lists.osgeo.org/mailman/listinfo/postgis-users
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: compiling from source code

Sandeep Gupta
It is this line exactly:

gcc-4.8 -I../liblwgeom  -fpic -I../libpgcommon
-I/home/linuxbrew/.linuxbrew/Cellar/geos/3.6.1/include
-I/home/linuxbrew/.linuxbrew/Cellar/libxml2/2.9.4_3/include/libxml2
-I/home/linuxbrew/.linuxbrew/Cellar/sfcgal/1.3.1/include -DHAVE_SFCGAL
   -fPIC -I/home/linuxbrew/.linuxbrew/Cellar/sfcgal/1.3.1/include
-DHAVE_SFCGAL -I. -I./
-I/home/linuxbrew/.linuxbrew/Cellar/postgresql/9.6.3/include/server
-I/home/linuxbrew/.linuxbrew/Cellar/postgresql/9.6.3/include/internal
-I/home/linuxbrew/.linuxbrew/opt/openssl/include
-I/home/linuxbrew/.linuxbrew/opt/readline/include -D_GNU_SOURCE
-I/home/linuxbrew/.linuxbrew/Cellar/libxml2/2.9.4_2/include/libxml2
-c -o postgis_module.o postgis_module.c




On Mon, Jul 10, 2017 at 4:50 PM, Sandeep Gupta <[hidden email]> wrote:

> No I didn't used the solution from that post.
> I don't see any mention of 4.8 in any files or in the environment variable.
>
> I started afresh and still end up with gcc-4.8 for linking.
>
>
>
> On Mon, Jul 10, 2017 at 4:38 PM, Regina Obe <[hidden email]> wrote:
>> Perhaps you had set it as part of what the answer described here when experimenting
>>
>> https://stackoverflow.com/questions/23338713/homebrew-how-to-permanently-override-homebrew-cc-homebrew-cxx-env-settings
>>
>> I assume you just need to reset the HOMEBREW_CC HOMEBREW_CX to nothing or what it was before.
>>
>>
>> -----Original Message-----
>> From: postgis-users [mailto:[hidden email]] On Behalf Of Sandeep Gupta
>> Sent: Monday, July 10, 2017 3:38 PM
>> To: PostGIS Users Discussion <[hidden email]>
>> Subject: Re: [postgis-users] compiling from source code
>>
>> It turned out the problem wasl related to compiling conftest.c:
>>
>> configure:6858: gcc  conftest.c
>> conftest.c:14:8: error: unknown type name 'Syntax'
>>         Syntax error
>>         ^
>> conftest.c:14:8: error: expected '=', ',', ';', 'asm' or '__attribute__' at end of input
>> configure:6858: $? = 1
>> configure: failed program was:
>> | /* confdefs.h */
>> | #define PACKAGE_NAME ""
>> | #define PACKAGE_TARNAME ""
>> | #define PACKAGE_VERSION ""
>> | #define PACKAGE_STRING ""
>> | #define PACKAGE_BUGREPORT ""
>> | #define PACKAGE_URL ""
>> | /* end confdefs.h.  */
>> | #ifdef __STDC__
>> | # include <limits.h>
>> | #else
>> | # include <assert.h>
>> | #endif
>> |                    Syntax error
>> configure:6858: gcc  conftest.c
>> conftest.c:14:8: error: unknown type name 'Syntax'
>>         Syntax error
>>         ^
>> conftest.c:14:8: error: expected '=', ',', ';', 'asm' or '__attribute__' at end of input
>> configure:6858: $? = 1
>>
>>
>> It is related to the problem posted here:
>> https://stackoverflow.com/questions/15041937/configure-error-c-preprocessor-fails-sanity-check'
>>
>> Passing -E option as follows fixes the problem ( i am not sure why):
>> ./configure --prefix=/home/linuxbrew/.linuxbrew/Cellar/postgis/2.3.3
>> CC=/home/linuxbrew/.linuxbrew/bin/gcc
>> CXX=/home/linuxbrew/.linuxbrew/bin/g++
>> CPP='/home/linuxbrew/.linuxbrew/bin/g++ -E
>>
>>
>> However the compile fails here (this is for postgis 2.3.3):
>>
>> make[1]: Entering directory
>> '/home/sandeep/.cache/Homebrew/postgis-2.3.3/postgis'
>> gcc-4.8 -I../liblwgeom  -fpic -I../libpgcommon -I/home/linuxbrew/.linuxbrew/Cellar/geos/3.6.1/include
>> -I/home/linuxbrew/.linuxbrew/Cellar/libxml2/2.9.4_3/include/libxml2
>> -I/home/linuxbrew/.linuxbrew/Cellar/sfcgal/1.3.1/include -DHAVE_SFCGAL
>>    -fPIC -I/home/linuxbrew/.linuxbrew/Cellar/sfcgal/1.3.1/include
>> -DHAVE_SFCGAL -I. -I./
>> -I/home/linuxbrew/.linuxbrew/Cellar/postgresql/9.6.3/include/server
>> -I/home/linuxbrew/.linuxbrew/Cellar/postgresql/9.6.3/include/internal
>> -I/home/linuxbrew/.linuxbrew/opt/openssl/include
>> -I/home/linuxbrew/.linuxbrew/opt/readline/include -D_GNU_SOURCE
>> -I/home/linuxbrew/.linuxbrew/Cellar/libxml2/2.9.4_2/include/libxml2
>> -c -o postgis_module.o postgis_module.c
>> make[1]: gcc-4.8: Command not found
>> <builtin>: recipe for target 'postgis_module.o' failed
>> make[1]: *** [postgis_module.o] Error 127
>>
>>
>> I am not sure why the make is picking up gcc-4.8.
>>
>> Thanks
>> sandeep
>>
>>
>>
>> On Mon, Jul 10, 2017 at 2:42 PM, Regina Obe <[hidden email]> wrote:
>>> Sandeep,
>>>
>>> Sounds like you might be having the same issue described here:
>>>
>>> https://stackoverflow.com/questions/23338713/homebrew-how-to-permanent
>>> ly-override-homebrew-cc-homebrew-cxx-env-settings
>>>
>>> Does the suggested answer work.
>>>
>>> Thanks,
>>> Regina
>>>
>>> -----Original Message-----
>>> From: postgis-users [mailto:[hidden email]] On
>>> Behalf Of Sandeep Gupta
>>> Sent: Monday, July 10, 2017 2:12 PM
>>> To: PostGIS Users Discussion <[hidden email]>
>>> Subject: Re: [postgis-users] compiling from source code
>>>
>>> Hi Regina,
>>>
>>>  I tried several version of postgis (2.3.3, 2.4.0dev, 2.1.8). I have pkg_config installed on my system.
>>>
>>>  The error I get is:
>>> checking how to run the C preprocessor... gcc
>>> configure: error: in `/home/sandeep/.cache/Homebrew/postgis-2.3.3':
>>> configure: error: C preprocessor "gcc" fails sanity check
>>>
>>> The configure doesn't proceed after this in my case.
>>>
>>> Is there any temporary workaround that you suggest I can try?
>>>
>>> Thanks.
>>> sandeep
>>>
>>>
>>> On Sat, Jul 8, 2017 at 7:40 PM, Regina Obe <[hidden email]> wrote:
>>>> Sandeep,
>>>>
>>>> Which version of PostGIS are you trying to build?  Your configure might be ending for another reason.  For example in PostGIS 2.4, I think we now have a dependency on pkg-config which older versions of PostGIS do not.  We'll sort this out before PostGIS release, but I think downside at moment, is the it fails if pkg-config is not installed.  I forget the exact error you get.
>>>>
>>>> I looked around on net for the -V and from what I can tell, that error is harmless and is just part of the process of configure checking the capabilities of the gcc compile.
>>>> I checked my own config.log and see the same error
>>>>
>>>> configure:2948: x86_64-w64-mingw32-gcc -V >&5
>>>> x86_64-w64-mingw32-gcc.exe: error: unrecognized command line option '-V'
>>>> x86_64-w64-mingw32-gcc.exe: fatal error: no input files compilation
>>>> terminated.
>>>>
>>>> But my configure continues, works fine and in the end shows this:
>>>>
>>>> configure:20134: result:
>>>> configure:20136: result:   PostGIS is now configured for x86_64-w64-mingw32
>>>> configure:20138: result:
>>>> configure:20140: result:  -------------- Compiler Info -------------
>>>> configure:20142: result:   C compiler:           x86_64-w64-mingw32-gcc -g -O2
>>>> configure:20144: result:   SQL preprocessor:     /mingw64/bin/cpp -traditional-cpp -w -P
>>>> configure:20146: result:
>>>> configure:20148: result:  -------------- Dependencies --------------
>>>> configure:20150: result:   GEOS config:          /projects/geos/rel-3.7.0devw64gcc48/bin/geos-config
>>>> configure:20152: result:   GEOS version:         3.7.0dev
>>>> configure:20155: result:   GDAL config:          /projects/gdal/rel-2.2.1w64gcc48/bin/gdal-config
>>>> configure:20157: result:   GDAL version:         2.2.1
>>>> configure:20161: result:   SFCGAL config:        /projects/CGAL/rel-sfcgal-1.3.0w64gcc48/bin/sfcgal-config
>>>> configure:20163: result:   SFCGAL version:       1.3.0
>>>> configure:20167: result:   PostgreSQL config:    /projects/postgresql/rel/pg9.4w64gcc48/bin/pg_config
>>>> configure:20169: result:   PostgreSQL version:   PostgreSQL 9.4.5
>>>> configure:20175: result:   PROJ4 version:        49
>>>> configure:20177: result:   Libxml2 config:       /projects/libxml/rel-libxml2-2.7.8w64gcc48/bin/xml2-config
>>>> configure:20179: result:   Libxml2 version:      2.7.8
>>>> configure:20181: result:   JSON-C support:       yes
>>>> configure:20183: result:   protobuf-c support:   yes
>>>> configure:20185: result:   PCRE support:         yes
>>>> configure:20187: result:   PostGIS debug level:  0
>>>> configure:20189: result:   Perl:                 /usr/bin/perl
>>>> configure:20191: result:
>>>> configure:20193: result:  --------------- Extensions ---------------
>>>> configure:20196: result:   PostGIS Raster:       enabled
>>>> configure:20204: result:   PostGIS Topology:     enabled
>>>> configure:20211: result:   SFCGAL support:       enabled
>>>> configure:20219: result:   Address Standardizer support:       enabled
>>>> configure:20225: result:
>>>> configure:20227: result:  -------- Documentation Generation --------
>>>> configure:20229: result:   xsltproc:             /projects/xsltproc/xsltproc
>>>> configure:20231: result:   xsl style sheets:     /projects/docbook/docbook-xsl-1.76.1
>>>> configure:20233: result:   dblatex:
>>>> configure:20235: result:   convert:              /c/Windows/System32/convert
>>>> configure:20237: result:   mathml2.dtd:          http://www.w3.org/Math/DTD/mathml2/mathml2.dtd
>>>>
>>>>
>>>>
>>>> Do you get an output anything like this or does it just end after that terminated?
>>>>
>>>> Thanks,
>>>> Regina
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> -----Original Message-----
>>>> From: postgis-users [mailto:[hidden email]] On
>>>> Behalf Of Sandeep Gupta
>>>> Sent: Friday, July 07, 2017 8:36 PM
>>>> To: PostGIS Users Discussion <[hidden email]>
>>>> Subject: Re: [postgis-users] compiling from source code
>>>>
>>>> Autoconf was missing, so I went ahead install autoconf, automake, and libtool.
>>>>
>>>> Tried recompiling.
>>>>
>>>> sh autogen.sh outputs:
>>>> * Running /home/linuxbrew/.linuxbrew/bin/glibtoolize (2.4.6)
>>>>    OPTIONS = --force --copy --install
>>>> glibtoolize: putting auxiliary files in '.'.
>>>> glibtoolize: copying file './config.guess'
>>>> glibtoolize: copying file './config.sub'
>>>> glibtoolize: copying file './install-sh'
>>>> glibtoolize: copying file './ltmain.sh'
>>>> glibtoolize: putting macros in AC_CONFIG_MACRO_DIRS, 'macros'.
>>>> glibtoolize: copying file 'macros/libtool.m4'
>>>> glibtoolize: copying file 'macros/ltoptions.m4'
>>>> glibtoolize: copying file 'macros/ltsugar.m4'
>>>> glibtoolize: copying file 'macros/ltversion.m4'
>>>> glibtoolize: copying file 'macros/lt~obsolete.m4'
>>>> glibtoolize: Consider adding '-I macros' to ACLOCAL_AMFLAGS in Makefile.am.
>>>> * Running /home/linuxbrew/.linuxbrew/bin/aclocal (1.15.1)
>>>> * Running /home/linuxbrew/.linuxbrew/bin/autoconf (2.69)
>>>> ======================================
>>>> Now you are ready to run './configure'
>>>> ======================================
>>>>
>>>> This does not solve though. When I run ./configure same error appears with -V flag being the issue.
>>>>
>>>> -sandeep
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> On Fri, Jul 7, 2017 at 6:33 PM, Regina Obe <[hidden email]> wrote:
>>>>> Okay I just got an irc note from Even Roualt.  He is running Ubuntu
>>>>> 16.04 and gcc 5.4  and had no issue running
>>>>>
>>>>> sh autogen.sh
>>>>> ./configure
>>>>>
>>>>> So doesn't seem like it's a newer gcc issue unless if its 5.3 specific.
>>>>>
>>>>> I'm suspecting something with brew,  MacOS, or tool chain like autoconf.
>>>>>
>>>>> What does:
>>>>>
>>>>> autoconf --version
>>>>>
>>>>> Return?
>>>>>
>>>>> I get
>>>>>
>>>>> autoconf (GNU Autoconf) 2.69
>>>>> Copyright (C) 2012 Free Software Foundation, Inc.
>>>>> License GPLv3+/Autoconf: GNU GPL version 3 or later
>>>>>
>>>>> Thanks,
>>>>> Regina
>>>>>
>>>>> -----Original Message-----
>>>>> From: postgis-users [mailto:[hidden email]]
>>>>> On Behalf Of Sandeep Gupta
>>>>> Sent: Friday, July 07, 2017 6:18 PM
>>>>> To: PostGIS Users Discussion <[hidden email]>
>>>>> Subject: Re: [postgis-users] compiling from source code
>>>>>
>>>>> Hi Regina,
>>>>>
>>>>>  Here is the output for gcc -v (install gcc from linuxbrew, which port of brew package manager of macOS):
>>>>>
>>>>> Reading specs from
>>>>> /home/linuxbrew/.linuxbrew/Cellar/gcc/5.3.0/lib/gcc/x86_64-unknown-l
>>>>> i
>>>>> n
>>>>> ux-gnu/5.3.0/specs
>>>>> COLLECT_GCC=gcc
>>>>> COLLECT_LTO_WRAPPER=/home/linuxbrew/.linuxbrew/Cellar/gcc/5.3.0/libe
>>>>> x e c/gcc/x86_64-unknown-linux-gnu/5.3.0/lto-wrapper
>>>>> Target: x86_64-unknown-linux-gnu
>>>>> Configured with: ../configure
>>>>> --prefix=/home/linuxbrew/.linuxbrew/Cellar/gcc/5.3.0
>>>>> --enable-languages=c,c++,objc,obj-c++,fortran --program-suffix=-5
>>>>> --with-gmp=/home/linuxbrew/.linuxbrew/opt/gmp
>>>>> --with-mpfr=/home/linuxbrew/.linuxbrew/opt/mpfr
>>>>> --with-mpc=/home/linuxbrew/.linuxbrew/opt/libmpc
>>>>> --with-isl=/home/linuxbrew/.linuxbrew/opt/isl --with-system-zlib --enable-libstdcxx-time=yes --enable-stage1-checking --enable-checking=release --enable-lto --with-build-config=bootstrap-debug --disable-werror --with-pkgversion='Homebrew gcc 5.3.0'
>>>>> --with-bugurl=https://github.com/Homebrew/homebrew/issues
>>>>> --enable-plugin --disable-nls --disable-multilib Thread model: posix
>>>>> gcc version 5.3.0 (Homebrew gcc 5.3.0)
>>>>>
>>>>>
>>>>> Thanks.
>>>>> sandeep
>>>>>
>>>>>
>>>>>
>>>>> On Fri, Jul 7, 2017 at 5:52 PM, Regina Obe <[hidden email]> wrote:
>>>>>> Steve and Sandeep,
>>>>>>
>>>>>> Can you try gcc -v instead and let me know what that outputs?
>>>>>>
>>>>>> I just checked our Debian PostGIS bot, and she's running gcc 5.2.1  and think she's running the newest of any of our bots . So I can 't rule out a newer gcc at fault here.
>>>>>> However if I do gcc -V, I get an error on her too, so that's not the issue here:
>>>>>> --
>>>>>>
>>>>>> gcc: error: unrecognized command line option  ?~-V ?T
>>>>>> gcc: fatal error: no input files
>>>>>> compilation terminated.
>>>>>>
>>>>>> However, lower case -v  (which is what I think configure uses, works just fine).
>>>>>>
>>>>>> gcc -v
>>>>>>
>>>>>> outputs:
>>>>>> Using built-in specs.
>>>>>> COLLECT_GCC=gcc
>>>>>> COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-linux-gnu/5/lto-wrapper
>>>>>> Target: x86_64-linux-gnu
>>>>>> Configured with: ../src/configure -v --with-pkgversion='Debian
>>>>>> 5.2.1-22' --with-bugurl=file:///usr/share/doc/gcc-5/README.Bugs
>>>>>> --enable-languages=c,ada,c++,java,go,d,fortran,objc,obj-c++
>>>>>> --prefix=/usr --program-suffix=-5 --enable-shared --ena
>>>>>> jar-dir=/usr/lib/jvm-exports/java-1.5.0-gcj-5-amd64
>>>>>> --with-arch-directory=amd64
>>>>>> --with-ecj-jar=/usr/share/java/eclipse-ecj.jar --enable-objc-gc
>>>>>> --enable-multiarch --with-arch-32=i586 --with-abi=m64
>>>>>> --with-multilib-list=m32,m64,mx32 --enable-m Thread model: posix
>>>>>> gcc version 5.2.1 20151010 (Debian 5.2.1-22)
>>>>>>
>>>>>>
>>>>>> I'm not sure where Sandeep's   gcc -V is coming from in configure, cause it looks like gcc -v works fine on his system too, but then somewhere down the line switches to upper case -V which is not a valid switch command even in lower gcc versions.
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> Thanks,
>>>>>> Regina
>>>>>>
>>>>>> -----
>>>>>> From: Stephen Woodbridge Date: Fri, Jul 7, 2017 at 2:09 PM
>>>>>>
>>>>>>
>>>>>>
>>>>>> I get the same error running on Ubuntu 16.04 with:
>>>>>>
>>>>>> $ gcc -V
>>>>>> gcc: error: unrecognized command line option  -V
>>>>>> gcc: fatal error: no input files
>>>>>> compilation terminated.
>>>>>>
>>>>>> Looks like the option should be --version $ gcc --version gcc
>>>>>> (Ubuntu
>>>>>> 5.4.0-6ubuntu1~16.04.4) 5.4.0 20160609 Copyright (C) 2015 Free
>>>>>> Software Foundation, Inc.
>>>>>> This is free software; see the source for copying conditions.
>>>>>> There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
>>>>>>
>>>>>> -Steve
>>>>>>
>>>>>> On 7/7/2017 1:51 PM, Sandeep Gupta wrote:
>>>>>> Hi,
>>>>>>
>>>>>> I am using gcc version 5.3 to compile postgis on Fedora.
>>>>>> The compile  fails at the configure step.
>>>>>>
>>>>>> I get the error:
>>>>>>
>>>>>> configure: error: C preprocessor "gcc" fails sanity check See
>>>>>> `config.log' for more details
>>>>>>
>>>>>> The relevant line in config.log:
>>>>>> configure:3031: gcc -v >&5
>>>>>> Reading specs from
>>>>>> /home/linuxbrew/.linuxbrew/Cellar/gcc/5.3.0/lib/gcc/x86_64-unknown-
>>>>>> l
>>>>>> i
>>>>>> n
>>>>>> ux-gnu/5.3.0/specs
>>>>>> COLLECT_GCC=gcc
>>>>>> COLLECT_LTO_WRAPPER=/home/linuxbrew/.linuxbrew/Cellar/gcc/5.3.0/lib
>>>>>> e x e c/gcc/x86_64-unknown-linux-gnu/5.3.0/lto-wrapper
>>>>>> Target: x86_64-unknown-linux-gnu
>>>>>> Configured with: ../configure
>>>>>> --prefix=/home/linuxbrew/.linuxbrew/Cellar/gcc/5.3.0
>>>>>> --enable-languages=c,c++,objc,obj-c++,fortran --program-suffix=-5
>>>>>> --with-gmp=/home/linuxbrew/.linuxbrew/opt/gmp
>>>>>> --with-mpfr=/home/linuxbrew/.linuxbrew/opt/mpfr
>>>>>> --with-mpc=/home/linuxbrew/.linuxbrew/opt/libmpc
>>>>>> --with-isl=/home/linuxbrew/.linuxbrew/opt/isl --with-system-zlib
>>>>>> --enable-libstdcxx-time=yes --enable-stage1-checking
>>>>>> --enable-checking=release --enable-lto
>>>>>> --with-build-config=bootstrap-debug --disable-werror
>>>>>> --with-pkgversion='Homebrew gcc 5.3.0'
>>>>>> --with-bugurl=https://github.com/Homebrew/homebrew/issues
>>>>>> --enable-plugin --disable-nls --disable-multilib Thread model:
>>>>>> posix gcc version 5.3.0 (Homebrew gcc 5.3.0)
>>>>>> configure:3042: $? = 0
>>>>>> configure:3031: gcc -V >&5
>>>>>> gcc: error: unrecognized command line option '-V'
>>>>>> gcc: fatal error: no input files
>>>>>> compilation terminated.
>>>>>>
>>>>>>
>>>>>>
>>>>>> It seems gcc does not like "-V" option. I this a issue to with
>>>>>> later gcc versions?
>>>>>>
>>>>>> Thanks.
>>>>>> sandeep
>>>>>> _______________________________________________
>>>>>> postgis-users mailing list
>>>>>> [hidden email]
>>>>>> https://lists.osgeo.org/mailman/listinfo/postgis-users
>>>>>>
>>>>>>
>>>>>> ---
>>>>>> This email has been checked for viruses by Avast antivirus software.
>>>>>> https://www.avast.com/antivirus
>>>>>>
>>>>>> _______________________________________________
>>>>>> postgis-users mailing list
>>>>>> [hidden email]
>>>>>> https://lists.osgeo.org/mailman/listinfo/postgis-users
>>>>>>
>>>>>>
>>>>>> _______________________________________________
>>>>>> postgis-users mailing list
>>>>>> [hidden email]
>>>>>> https://lists.osgeo.org/mailman/listinfo/postgis-users
>>>>> _______________________________________________
>>>>> postgis-users mailing list
>>>>> [hidden email]
>>>>> https://lists.osgeo.org/mailman/listinfo/postgis-users
>>>>>
>>>>> _______________________________________________
>>>>> postgis-users mailing list
>>>>> [hidden email]
>>>>> https://lists.osgeo.org/mailman/listinfo/postgis-users
>>>> _______________________________________________
>>>> postgis-users mailing list
>>>> [hidden email]
>>>> https://lists.osgeo.org/mailman/listinfo/postgis-users
>>>>
>>>> _______________________________________________
>>>> postgis-users mailing list
>>>> [hidden email]
>>>> https://lists.osgeo.org/mailman/listinfo/postgis-users
>>> _______________________________________________
>>> postgis-users mailing list
>>> [hidden email]
>>> https://lists.osgeo.org/mailman/listinfo/postgis-users
>>>
>>> _______________________________________________
>>> postgis-users mailing list
>>> [hidden email]
>>> https://lists.osgeo.org/mailman/listinfo/postgis-users
>> _______________________________________________
>> postgis-users mailing list
>> [hidden email]
>> https://lists.osgeo.org/mailman/listinfo/postgis-users
>>
>> _______________________________________________
>> postgis-users mailing list
>> [hidden email]
>> https://lists.osgeo.org/mailman/listinfo/postgis-users
_______________________________________________
postgis-users mailing list
[hidden email]
https://lists.osgeo.org/mailman/listinfo/postgis-users
Loading...